Search for dissertations about: "Boiler"
Showing result 1 - 5 of 164 swedish dissertations containing the word Boiler.
-
1. Co-firing animal waste, sludge, residue wood, peat and forest fuels in a 50MWth CFB boiler : ash transformation, availability and process improvements
Abstract : The direct variable costs for heat and electricity production based on solid biomass fuel combustion is approximately 3-5 times lower than the costs in a fossil fuel-oil based boiler in Sweden. In addition waste derived biomass fuels are typically much cheaper than biomass not classified as waste. READ MORE
-
2. Gas Mixing in a Circulating Fluidised Bed Boiler
Abstract : The present thesis is a study on the gas-mixing behaviour in a circulating fluidised bed (CFB) boiler. The aim is to describe how gas is spread in different regions of a CFB furnace and to explain variations in the mixing rate under different operating conditions. READ MORE
-
3. Physical and numerical modelling of flow pattern and combustion process in pulverized fuel fired boiler
Abstract : This licentiate thesis describes development of modellingtools, experimental physical modelling and numerical modellingto simulate real combustion processes for advanced industrialutility boiler before and after retrofit.The work presents extended study about formation,destruction and control of pollutants, especially NOx, whichoccur during combustion process. READ MORE
-
4. Analysing the transient operation of the boiler and the TES tank for improving the flexibility in biomass CHP
Abstract : The uncertainty in the energy systems due to the continuously growing share of variable renewable energy sources (VRES) increases the requirements for flexibility. From the multiple mechanisms to improve flexibility, biomass-fired combined heat and power plants (CHPs) have gained attention due to their sustainability and high efficiency. READ MORE
-
5. Sintering in the Kraft Pulp Mill - Studies in the Rotary Kiln and Recovery Boiler
Abstract : The conversion of black liquor to white liquor is carried out in the chemical recovery system, which is made up of several units; in two of them, i.e. the recovery boiler and the rotary kiln, sintering plays an important role. READ MORE