Search for dissertations about: "Fast Thermal Management"
Showing result 1 - 5 of 12 swedish dissertations containing the words Fast Thermal Management.
-
1. The Performance of a Multi Cylinder HCCI Engine using Variable Compression Ratio and Fast Thermal Management
Abstract : The prime mover in the world today is the Internal Combustion (IC) engine. The development and improvement of the internal combustion engines since Nicolaus August Otto and Rudolf Diesel has continued until today and will continue long into the future. No major competitor to the IC engine has yet emerged. READ MORE
-
2. Closed-Loop Combustion Control of a Multi Cylinder HCCI Engine using Variable Compression Ratio and Fast Thermal Management
Abstract : The current Spark Ignited (SI) engine equipped with three-way catalyst offers low emissions, but has low efficiency at part load, which results in unnecessarily high CO2 emissions. The Compression Ignited (CI) engines have higher efficiency and hence lower CO2 emissions, but suffer from higher Nitrogen Oxide (NOx) and Particulate Matter (PM) emissions, and no three-way catalyst can be used. READ MORE
-
3. Thermal conductivity of wide and ultra-wide bandgap semiconductors
Abstract : This PhD thesis presents experimental and theoretical studies of the thermal conductivity of wide and ultra-wide bandgap semiconductors including GaN, AlN, β-Ga2O3 binary compounds, and AlxGa1−xN, ScxAl1−xN, YxAl1−xN ternary alloys. Thermal conductivity measurements are conducted using the transient thermoreflectance (TTR) technique and the results are interpreted using analytical models based on the solution of the Boltzmann transport equation (BTE) within the relaxation time approximation (RTA). READ MORE
-
4. Thermal conductivity of AlXGa1-XN and β-Ga2O3 semiconductors
Abstract : For the high-power (HP) electronic applications the existing Si-based devices have reached the performance limits governed by the material properties. Hence the device innovation itself is unable to enhance the overall performance. READ MORE
-
5. Alternative reducing agents in metallurgical processes : Experimental study of thermal characterization of shredder residue material
Abstract : Coal used in metallurgical processes can participate in reduction reactions to produce metals and alloys from oxides. Base metals production leads to generation of slag, which contains valuable metals that can be recovered and recycled. There are several options to treat the slag, depending on the metal content in the slag. READ MORE