Search for dissertations about: "Hollomon Equation"

Found 3 swedish dissertations containing the words Hollomon Equation.

  2. 1. On Thermal Conductivity and Strength in Compacted Graphite Irons : Influence of Temperature and Microstructure

    Author : Martin Selin; Ingvar L. Svensson; Attila Diószegi; Steve Dawson; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Compacted Graphite Iron; Thermal Conductivity; Mechanical Properties; Hardness; Microstructure; Plastic Deformation; Hollomon Equation; Elevated Temperature; Materials science; Teknisk materialvetenskap;

    Abstract : Thermal conductivity, hardness and strength are all highly important material properties, affecting the performance and life expectancy of components operating at elevated temperatures. The main purpose of this work has been to increase the knowledge and understanding concerning how mechanical and physical properties are affected by temperature and microstructure in compacted graphite irons. READ MORE

  4. 2. Deformation Behaviour, Microstructure and Texture Evolution of CP Ti Deformed at Elevated Temperatures

    Author : Zhipeng Zeng; Stefan Jonsson; Hans J. Roven; Bevis Hutchinson; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Commercially pure titanium; Zener–Hollomon parameter; Dynamic recovery; Dynamic recrystallization; Recrystallized volume fraction; Grain size; Flow stress; Constitutive equation; Texture; High angle grain boundary; Low angle grain boundary; Deformation twinning; Schmid factor; Misorientation; Hot compression; Slip system; Subgrain; EBSD; Construction materials; Konstruktionsmaterial;

    Abstract : In the present work, deformation behavior, texture and microstructure evolution of commercially pure titanium (CP Ti) are investigated by electron backscattered diffraction (EBSD) after compression tests at elevated temperatures. By analysing work hardening rate vs. flow stress, the deformation behaviour can be divided into three groups, viz. READ MORE

  5. 3. Heat treatment of Al-Si-Cu-Mg casting alloys

    Author : Emma Sjölander; Salem Seifeddine; Ingvar Svensson; Sten Johansson; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cast aluminium alloys; Heat treatment; Solution treatment; Artificial ageing; Tensile properties; Plastic deformation; Microstructure; Modelling;

    Abstract : Environmental savings can be made by increasing the use of aluminium alloys in the automotive industry as the vehicles can be made lighter. Increasing the knowledge about the heat treatment process is one task in the direction towards this goal. The aim of this work is to investigate and model the heat treatment process for Al-Si casting alloys. READ MORE