Search for dissertations about: "Splat."

Found 4 swedish dissertations containing the word Splat..

  2. 1. A Study of the Adhesion Strength of Plasma Sprayed Coatings

    Author : Fouzi Bahbou; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Splat.; Surface roughness; Mechanical anchoring; Grit blasting; Adhesion strength; Protal® process; Fractal analysis; Thermal spraying; Coating; Surface pre-treatment;

    Abstract : Surface preparation prior to thermal spraying is a key factor in ensuring a good adhesion of the coating onto the part to be coated. Surface pre-treatment conditions and methods have mainly been developed experimentally and have changed little over the years. READ MORE

  4. 2. A study of the adhesion strength of plasma sprayed coatings

    Author : M. Fouzi Bahbou; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grit blasting; Thermal spraying; Coating; Surface pre-treatment; Surface roughness; Fractal analysis; Adhesion strength; Mechanical anchoring; Protal® process; Splat; Manufacturing engineering; Produktionsteknik; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Abstract : .... READ MORE

  5. 3. Investigation of microstructure and porosity of columnar yttria-stabilized zirconia coatings produced by axial suspension plasma spraying

    Author : Johanna Ekberg; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; X-ray microscopy; thermal barrier coatings; NMR cryoporometry; suspension plasma spraying; scanning electron microscopy; porosity measurements;

    Abstract : Ceramic topcoats provide thermal barrier coatings (TBCs) with its heat insulating properties. The heat transfer is primarily occurring by conduction through the bulk material, therefore features such as interfaces, pores and grain boundaries are essential for thermal insulation as they act as scattering sites. READ MORE

  6. 4. Erosion - Corrosion Resistance and Adhesion of Laser and Thermally Deposited Coatings in Fluidised Beds

    Author : Anders Hjörnhede; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; coating; fluidised bed; HVOF; laser cladding; CFB; FBC; adhesion testing; PFBC; thermal spraying; arc spray; erosion - corrosion; acoustic emission;

    Abstract : High temperature erosion - corrosion is the major source for degradation of components such as heat exchangers, tubes, cyclones and water walls used in Fluidised Bed Combustion (FBC) plants. By coating the exposed components with a protective material, the degradation rate can be decreased. READ MORE