Search for dissertations about: "austenite"

Showing result 1 - 5 of 104 swedish dissertations containing the word austenite.

  2. 1. Morphological characterization of primary austenite in cast iron

    Author : Juan Carlos Hernando; Attila Diószegi; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Lamellar Graphite Iron; Solidification; Primary Austenite; Microstructure Evolution; Dendritic coarsening; Compacted Graphite Iron; Magnesium Fading; Nodularity;

    Abstract : Automotive industry products portfolio includes a wide variety of complex‐shaped cast iron products, such as truck engine components, that need to withstand a constant trend of higher demands, especially urged by stricter environmental regulations on emissions. Combined with this continued demand on properties improvement, cast iron industry faces a process problem related to the lack of understanding of solidification and mechanisms behind defect formation. READ MORE

  4. 2. The role of primary austenite morphology in cast iron

    Author : Juan Carlos Hernando; Attila Diószegi; Arne Dahle; Jessica Elfsberg; Roberto Boeri; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Solidification; Cast Iron; Primary Austenite; Microstructure Evolution; Coarsening; LGI; CGI; SGI; UTS; stelning; gjutjärn; primär austenit; mikrostrukturbildning; förgrovning; LGI; CGI; SGI; UTS;

    Abstract : Automotive industry products portfolio includes a wide variety of complex-shaped cast iron products, such as truck engine components. Urged by strict environmental regulations on emissions, these components constantly need to combine higher demands on performance with lighter designs. READ MORE

  5. 3. Modelling and Characterisation of the Martensite Formation in Low Alloyed Carbon Steels

    Author : Jessica Gyhlesten Back; Lars-Erik Lindgren; Göran Engberg; Bevis Hutchinson; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dilatometry; Hardness; EBSD; Martensite; Austenite; Kurdjumov-Sachs; Phase transformation; Modelling; Material Mechanics; Materialmekanik; Steel Forming and Surface Engineering;

    Abstract : The current work contains experimental and theoretical work about the formation of martensite from the austenitic state of the steel Hardox 450. Simulation of rolling and subsequent quenching of martensitic steel plates requires a model that can account for previous deformation, current stresses and the temperature history, therefore dilatometry experiments were performed, with and without deformation. READ MORE

  6. 4. Modeling the Microstructural Evolution during Hot Deformation of Microalloyed Steels

    Author : Linda Bäcke; Stefan Jonsson; Eric J. Palmiere; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; modeling; austenite; microalloyed steels; hot deformation; microstructure evolution; static recrystallization; dynamic recrystallization; metadynamic recrystallization<; Materials science; Teknisk materialvetenskap;

    Abstract :   This thesis contains the development of a physically-based model describing the microstructural evolution during hot deformation of microalloyed steels. The work is mainly focused on the recrystallization kinetics. During hot rolling, the repeated deformation and recrystallization provides progressively refined recrystallized grains. READ MORE

  7. 5. Modeling the microstructural evolution during hot working of C-Mn and of Nb microalloyed steels using a physically based model

    Author : Linda Lissel; []
    Keywords : austenite; modeling; hot deformation; microstructure; evolution; static recrystallization; dynamic recrystallization; metadynamic recrystallization; Modellering av mikrostrukturutvecklingen hos mikrolegerade stål under varmdeformation;

    Abstract : Recrystallization kinetics, during and after hot deformation, has been investigated for decades. From these investigations several equations have been derived for describing it. The equations are often empirical or semi-empirical, i.e. READ MORE