Search for dissertations about: "blisk"

Found 4 swedish dissertations containing the word blisk.

  2. 1. Contribution to Numerical and Experimental Studies of Flutter in Space Turbines. Aerodynamic Analysis of Subsonic or Supersonic Flows in Response to a Prescribed Vibratory Mode of the Structure

    Author : Hakim Ferria; Pascal Ferrand; Torsten Fransson; François Moyroud; France Ecole Centrale de Lyon Laboratoire de Mécanique des Fluides et d'Acoustique; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; flutter; space turbine; LRANS computation; flutter measurement; shock wave boundary layer interaction; blisk; cut-on cut-off condition; interblade phase angle; combined modes;

    Abstract : Modern turbomachines are designed towards thinner, lighter and highly loaded blades. This gives rise to increased sensitivity to flow induced vibrations such as flutter, which leads to structure failure in a short period of time if not sufficiently damped. READ MORE

  4. 2. Aerodynamic design framework for low-pressure compression systems

    Author : Marcus Lejon; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; manufacturing variations; optimization; stage matching; tip clearance; validation; Turbomachinery; CFD; surface roughness; compressor;

    Abstract : Aircraft engine manufacturers strive to improve current state of the art designs through continuous development efforts. By improving existing designs and exploring new alternatives, the goal is to reduce the fuel consumption - a topic of high relevance due to the remarkable growth rate of air traffc. READ MORE

  5. 3. Development and Validation of a Numerical Tool for the Aeromechanical Design of Turbomachinery

    Author : María Angélica Mayorca; Torsten Fransson; Damian Vogt; Eric Seinturier; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aeromechanical design; turbomachinery; numerical tool; reduced order modeling; mistuning; ROM; aero-structure coupling; CFD; FEM; methods; Mechanical energy engineering; Mekanisk energiteknik;

    Abstract : In aeromechanical design one of the major rules is to operate under High Cyclic Fatigue (HCF) margins and away from flutter. The level of dynamic excitations and risk of HCF can be estimated by performing forced response analyses from blade row interaction forces or Low Engine Order (LEO) excitation mechanisms. READ MORE

  6. 4. Numerical Methods for Turbomachinery Aeromechanical Predictions

    Author : Maria Angelica Mayorca; Damian Vogt; Torsten Fransson; Robert Kielb; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aeromechanics; numerical tools; methods; turbomachinery; aeroelasticity; gas turbines; vibrations;

    Abstract : In both aviation and power generation, gas turbines are used as key components. An important driver of technological advance in gas turbines is the race towards environmentally friendly machines, decreasing the fuel burn, community noise and NOx emissions. READ MORE