Search for dissertations about: "coating treatment"
Showing result 1 - 5 of 115 swedish dissertations containing the words coating treatment.
-
1. Nanopolysaccharide coatings for functional surfaces in water-treatment materials : From mechanisms to process scalability
Abstract : In this thesis, materials from renewable resources were used to develop functionalized surfaces for water treatment. The work is thus inspired by, and contributes to, the United Nations sustainable goals of: (i) clean water and sanitation, (ii) climate action, (iii) responsible consumption and production, (iv) life below water, and (v) partnerships for the goals. READ MORE
-
2. Polymer-coated paper and board - Role of substrate, polymer characteristics and additives
Abstract : The surface roughness of paper or board has a significant influence on the homogeneity of an applied polymer film, and this thesis discusses how it may be improved by a surface treatment, e.g. high-temperature calendering or precoating. READ MORE
-
3. High Temperature Oxidation and Corrosion of Ni-Based Superalloys for Industrial Gas Turbines
Abstract : High temperature oxidation and corrosion of Ni-based superalloys used for blades in industrial gas turbines was studied using advanced high-resolution electron microscopy methods. Both coated and non-coated alloys were tested. READ MORE
-
4. A Study of the Adhesion Strength of Plasma Sprayed Coatings
Abstract : Surface preparation prior to thermal spraying is a key factor in ensuring a good adhesion of the coating onto the part to be coated. Surface pre-treatment conditions and methods have mainly been developed experimentally and have changed little over the years. READ MORE
-
5. Evaluation of Innovative Rehabilitation Technologies Utilising Polymer Composites for Aging Sewer Systems
Abstract : Water and wastewater sewer system maintenance is among the costliest aspects of infrastructure investment. The replacement of deteriorated lines is a difficult and expensive process that causes community disturbance and is generally not conducted fast enough to meet demand. READ MORE