Search for dissertations about: "corrosion"

Showing result 1 - 5 of 591 swedish dissertations containing the word corrosion.

  2. 1. High temperature corrosion in a biomass-fired power boiler : Reducing furnace wall corrosion in a waste wood-fired power plant with advanced steam data

    Author : Yousef Alipour; Pamela Henderson; Peter Szalalos; Christofer Leygraf; Jan Froitzheim; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High temperature corrosion; Waterwalls; Power plant corrosion; NOx reducing enviroments; Biomass; Waste wood; Thermodynamic calculation modelling; corrosion-resistance alloy; Furnace wall corrosion; Högtemperaturekorrosion; Eldstadsväggar; kraftverks korrosion; låg Nox mijöer; biomassa; returträ; Termodynamisk modellering; korrosionsbeständighet legering; eldstadskorrosion;

    Abstract : The use of waste (or recycled) wood as a fuel in heat and power stations is becoming more widespread in Sweden (and Europe), because it is CO2 neutral with a lower cost than forest fuel. However, it is a heterogeneous fuel with a high amount of chlorine, alkali and heavy metals which causes more corrosion than fossil fuels or forest fuel. READ MORE

  4. 2. Furnace Wall Corrosion in a Wood-fired Boiler

    Author : Yousef Alipour; Pamela Henderson; Mikko Hupa; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High Temperature Corrosion; Used-wood Fired Boilers; Furnace Wall Corrosion; Cl-induced Corrosion; 16Mo3; Nickel-based Alloys; FeCrAl Alloys; Fuel Additive; Sewage Sludge; >Thermodynamics Modelling; Högtemperaturkorrosion; Returträ Förbränningspannor; Eldstad Korrosion; klor-inducerad korrosion; 16Mo3; Nickelbaslegeringar; FeCrAl-legeringar; Bränsletillsatser; Avloppsslam; Termodynamik Modellering; Kemi; Chemistry;

    Abstract : The use of renewable wood-based fuel has been increasing in the last few decades because it is said to be carbon neutral. However, wood-based fuel, and especially used wood (also known as recycled wood or waste wood), is more corrosive than virgin wood (forest fuel), because of higher amounts of chlorine and heavy metals. READ MORE

  5. 3. High Temperature Corrosion Behavior in Biomass- and Waste-Fired Boilers - Insights into catastrophic corrosion and corrosion mitigation techniques

    Author : Julien Phother Simon; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 3D tomography; TEM; Sulfur Recirculation; Waste; High-temperature corrosion; Biomass; Coatings; Stainless steel; Ni-based alloys; Deposits; KCl-induced corrosion;

    Abstract : Carbon dioxide is contributing to the greenhouse effect and a significant part comes from the use of fossil fuels. Utilizing more renewable fuels is therefore a solution to decrease the net release of CO2 emissions to the atmosphere. READ MORE

  6. 4. Nanocomposite films for corrosion protection

    Author : Majid Sababi; Jinshan Pan; J.M.C. (Arjan) Mol; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; corrosion protection; nanocomposite; coating; tool alloy; layer‐by‐layer; polarization; passivity; nanomechanical; topography; Mefp‐ 1; ceria nanoparticle; PAni; UV‐cure; AFM; Peak Force QNM; EIS; SEM; CRM; QCM‐D; ATR‐FTIR;

    Abstract : This thesis describes technical and scientific aspects of new types of composite films/coatings for corrosion protection of carbon steel, composite films with nanometer thickness consisting of mussel adhesive protein (Mefp‐1) and ceria nanoparticles, and polymeric composite coatings with micrometre thickness consisting of conducting polymer and ceria nanoparticles in a UV‐curing polyester acrylate (PEA) resin.The influence of microstructure on corrosion behaviour was studied for a Fe‐Cr‐V‐N alloy containing micro‐sized nitrides with different chemical composition spread in martensitic alloy matrix. READ MORE

  7. 5. Corrosion of Ferritic Stainless Steels Used in Solid Oxide Fuel Cells

    Author : Claudia Goebel; Chalmers tekniska högskola; []
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; SOFC; Corrosion; Dual Atmosphere; Interconnect; Area Specific Resistance;

    Abstract : Solid oxide fuel cells (SOFC) are energy conversion systems with clean emissions (depending on the fuel used) and high electrical efficiencies, which could potentially replace conventional conversion systems such as combustion engines. However, other issues, such as high costs and limited lifetime, must be resolved before widespread commercialization of SOFCs can be achieved. READ MORE