Search for dissertations about: "dislocation"
Showing result 21 - 25 of 205 swedish dissertations containing the word dislocation.
-
21. Toward first-principles understanding of carbonitride precipitation in steels
Abstract : The most important and widely used group of metallic alloys is steels, whichare alloys of the element iron together with carbon and usually other elementssuch as B, N, V, Nb and Cr. The strength in these alloys is closely connectedto the distribution of point defects, precipitates and grain boundaries whicheffectively act as obstacles for dislocation migration. READ MORE
-
22. Atom probe tomography of Zircaloy-2 exposed to boiling water reactor operation
Abstract : Zirconium alloys are used as cladding tubes for the fuel in nuclear reactors. In boiling water reactors (BWRs), the alloy Zircaloy-2, which contains the alloying elements Sn, Fe, Cr, Ni, and O, is commonly used. READ MORE
-
23. Modeling defect structure evolution in spent nuclear fuel container materials
Abstract : Materials intended for disposal of spent nuclear fuel require a particular combination of physical and chemical properties. The driving forces and mechanisms underlying the material’s behavior must be scientifically understood in order to enable modeling at the relevant time- and length-scales. READ MORE
-
24. Numerical simulation of shape rolling
Abstract : In the first part of this thesis, the FE program MSC.Marc is applied for coupled thermomechanical simulations of wire-rod rolling. In order to predict material behaviour of an AISI 302 stainless steel at high strain rates generated during wire-rod rolling, a material model based on dislocation density is applied. READ MORE
-
25. Structure and mechanical properties of dual phase steels : An experimental and theoretical analysis
Abstract : The key to the understanding of the mechanical behavior of dual phase (DP) steels is to a large extent to be found in the microstructure. The microstructure is in its turn a result of the chemical composition and the process parameters during its production. READ MORE