Search for dissertations about: "flow boiling heat transfer"
Showing result 1 - 5 of 33 swedish dissertations containing the words flow boiling heat transfer.
-
1. Flow Boiling Heat Transfer in Single Vertical Channels of Small Diameter
Abstract : Microchannel heat exchangers present many advantages, such as reduced size, high thermal efficiency and low fluid inventory; and are increasingly being used for heat transfer in a wide variety of applications including heat pumps, automotive air conditioners and for cooling of electronics.However, the fundamentals of fluid flow and heat transfer in microscalegeometries are not yet fully understood. READ MORE
-
2. Experimental Heat Transfer, pressure drop, and Flow Visualization of R-134a in Vertical Mini/Micro Tubes
Abstract : For the application of minichannel heat exchangers, it is necessary to have accurate design tools for predicting heat transfer and pressure drop. Until recently, this type of heat exchangers was not well studied, and in the scientific literature there were large discrepancies between results reported by different investigators. READ MORE
-
3. Some two-phase flow and boiling heat transfer characteristics in small diameter tubes
Abstract : .... READ MORE
-
4. Flow Boiling Heat Transfer and Pressure Drop. Experiments and Model Development for Complex Geometries
Abstract : Two very different evaporator geometries, a dimple plate and a herringbone microfin tube, have been studied. Heat transfer and pressure drop for both pure refrigerants and refrigerant mixtures have been determined experimentally. READ MORE
-
5. Flow boiling of ammonia and propane in mini channels
Abstract : The environmental concerns in recent times have grown especially after signing Montreal protocol. In the last ten years, researchers have focussed mainly on understanding the boiling and condensation phenomena of HFC refrigerants in minichannels. READ MORE