Search for dissertations about: "half center"
Showing result 1 - 5 of 48 swedish dissertations containing the words half center.
-
1. Discrete Velocity Models and Half-Space Problems
Abstract : We study some questions related to discrete velocity models (DVMs) of the Boltzmann equation. In the case of plane stationary problems the typical DVM reduces to a dynamical system (system of ODEs). Properties of such systems are studied in this paper in the most general case. READ MORE
-
2. Near wall fibre orientation in flowing suspensions
Abstract : This thesis deals with fibre orientation in wall-bounded shear flows. The primary application in mind is papermaking. The study is mainly experimental,but is complemented with theoretical considerations.The main part of the thesis concerns the orientation of slowly settlingfibres in a wall-bounded viscous shear flow. READ MORE
-
3. Turbulent Boundary Layer Separation and Control
Abstract : Boundary layer separation is an unwanted phenomenon in most technical applications, as for instance on airplane wings, ground vehicles and in internal flow systems. If separation occurs, it causes loss of lift, higher drag and energy losses. It is thus essential to develop methods to eliminate or delay separation. READ MORE
-
4. Inclusion Behaviour under a Swirl Flow in a Continuous Casting Process
Abstract : A swirl flow generated in a submerged entry nozzle (SEN) can effectively improve a flow pattern and heat transfer in a continuous casting process by using the methods of “swirl blade type” and “electromagnetic type”. In order to obtain a further in-depth understanding with respect to the effect of a swirl flow on a continuous casting process, the inclusion behaviour in a SEN and a mold was studied in the present work. READ MORE
-
5. Inclusion Motion under a Swirl Flow in the Continuous Casting Process and Wire Feeding in the Induction Furnace
Abstract : The thesis includes the studies of two phenomena related to continuous casting. One subject is the inclusion motion in the submerged entry nozzle (SEN) and mold when using a swirl flow. The swirl flow is generated in a SEN by using an electromagnetic swirl flow generator (EMSFG). READ MORE