Search for dissertations about: "inorganics"
Showing result 1 - 5 of 6 swedish dissertations containing the word inorganics.
-
1. Towards a pure kraft lignin
Abstract : The most widely used production method for paper pulp in the world is kraft pulping. In chemical pulping the polymer, lignin, which binds the wood fibres together, is partly depolymerized. This allows the wood fibres to be separated from each other. READ MORE
-
2. Use of Bed Materials in Dual Fluidized Bed (DFB) Systems
Abstract : Dual Fluidized Bed (DFB) gasification is one alternative for the production of biofuels. In a DFB gasification process, the bed material plays a crucial role. Primary role of the bed material is to provide the heat needed for the gasification reaction. READ MORE
-
3. Assessment of stormwater and snowmelt quality based on water management priorities and the consequent water quality parameters
Abstract : Stormwater and snowmelt pollution contributes to degradation of quality of the receiving waters. For assessing such impacts, it is effective to focus on specific causes of degradation, as done in this study of the quality of stormwater and snowmelt discharges into the receiving waters serving for supply of raw drinking water and water-based recreation. READ MORE
-
4. The initial phase of the sodium bisulfite pulping of softwood dissolving pulp
Abstract : The sulfite pulping process is today practised in only a small number of pulp mills around the globe and the number of sulfite mills that use sodium as the base (cation) is less than five. However, due to the increasing interest in the wood based biorefinery concept, the benefits of sulfite pulping and especially the sodium based variety, has recently gained a lot of interest. READ MORE
-
5. Choice of bed material: a critical parameter in the optimization of dual fluidized bed systems
Abstract : Dual Fluidized Bed (DFB) gasification is a promising alternative method for the production of biofuels. In the DFB gasification process, the bed material, which is a crucial component of the process, has two possible roles: 1) to provide the heat needed for the gasification reaction; and 2) if it has catalytic properties, to improve the quality of the produced gas. READ MORE