Search for dissertations about: "line shape"

Showing result 1 - 5 of 183 swedish dissertations containing the words line shape.

  2. 1. Computational methods for on-line shape inspection

    Author : Per Bergström; Luleå tekniska universitet; []
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; Scientific Computing; Teknisk-vetenskapliga beräkningar;

    Abstract : This licentiate thesis describes computational methods that solve problems occurring in industrial on-line shape quality inspection of produced items. These items are measured and compared with their corresponding CAD object. The meaning of on-line is that the inspection is done on-line in the production line, i.e. READ MORE

  4. 2. Shape Optimization for Acoustic Wave Propagation Problems

    Author : Rajitha Udawalpola; Martin Berggren; Pekka Neittaanmäki; Uppsala universitet; []
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; shape optimization; design optimization; acoustic wave propagation; Helmholtz equation; Boundary Element Method; Finite Element Method; inverse problems; adjoint method; gradient-based optimization; Scientific Computing; Beräkningsvetenskap;

    Abstract : Boundary shape optimization is a technique to search for an optimal shape by modifying the boundary of a device with a pre-specified topology. We consider boundary shape optimization of acoustic horns in loudspeakers and brass wind instruments. READ MORE

  5. 3. Rheology of cement grout  : Ultrasound based in-line measurement technique and grouting design parameters

    Author : Mashuqur Rahman; Stefan Larsson; Ulf Håkansson; Olafur Wallevik; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; grouting; grouting design; cement grout; Bingham number; shear rate; plug flow; thixotropy; yield stress; in-line rheology; UVP PD; Flow-Viz; viscosity bifurcation; aging; off-line rheometry; pump characteristics; Civil and Architectural Engineering; Byggvetenskap;

    Abstract : Grouting is performed in order to decrease the permeability and increase the stiffness of the material, especially soil and rock. For tunnelling and underground constructions, permeation grouting is done where cement based materials are pumped inside drilled boreholes under a constant pressure, higher than the ground water pressure. READ MORE

  6. 4. On-line shape inspection using a projected fringe pattern

    Author : Sara Rosendahl; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Experimental Mechanics; Experimentell mekanik;

    Abstract : A stereo camera system together with a single projected fringe pattern and one image recording is used to measure 3D-shape. The idea is to make the measurement quick enough to be able to use the method when testing quality on-line in manufacturing industry. For this to be possible the digital master (e.g. READ MORE

  7. 5. Increased Visual Quality through Robust Split-Line Design

    Author : Andreas Dagman; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Split-Line; Simulation; Visual Quality Appearance; Quality; Tolerance Analysis;

    Abstract : In the early phases of the product development process, the initial product geometry can be a non-divided shape, just a shell. This initial product geometry has to be divided into individual parts in order to manufacture and fulfil the functionality of the product. In the case of automobiles, these parts can be fenders, doors, hoods, etc. READ MORE