Search for dissertations about: "penetration test"
Showing result 1 - 5 of 96 swedish dissertations containing the words penetration test.
-
1. Grouting of Fractured Rock with Silica Sol; Grouting design based on penetration length
Abstract : ABSTRACTRecent grouting projects in Sweden have concentrated on the grout itself. The only grout normally used in Sweden is cement-based. During the past 10 years, the acceptable flow of water into tunnels has been reduced significantly. The current requirements mean that an average fracture aperture of around 0. READ MORE
-
2. Characterisation of Fractured Rock for Grouting Using Hydrogeological Methods
Abstract : Sealing of tunnels by grouting demands knowledge concerning the fractured rock and the grout, followed by an appropriate choice of strategy and equipment. In this thesis, the characterisation of rock is the main issue and, since it addresses the engineering problem of producing a description for grouting, the properties of grout and the grouting procedure need to be considered. READ MORE
-
3. Grouting of Hard Rock with Gelling Liquids, Field and Laboratory Studies of Silica sol
Abstract : Recent grouting projects in Sweden have concentrated on the grout itself. The only grout normally used in Sweden is a cement-based one. During the past 10 years, the acceptable flow of water into tunnels has been significantly reduced. The current requirements mean that an average fracture aperture of around 0. READ MORE
-
4. Wetting and Capillary Flow of Surfactant Solutions and Inks
Abstract : This thesis presents results of a series of experimental studies on the spreading dynamics of small drops of complex solutions on solid surfaces. The capillary flow dynamics of complex solutions have also been investigated. READ MORE
-
5. Metal Expansion Penetration During Solidification of Grey Cast Iron
Abstract : The meta! expansion penetration has been examined experimentally. The whole casting process was simulated using a commercial software, in order to investigate the solidification characteristics and the pore formation in the casting studied. READ MORE