Search for dissertations about: "solidification alloys"

Showing result 1 - 5 of 61 swedish dissertations containing the words solidification alloys.

  2. 1. Characterization and Modification of Microstructure in Al-Co-Cr-Fe-Ni Eutectic High-Entropy Alloys

    Author : Adrianna Lozinko; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; eutectic alloys; solidification; orientation relationship; high-entropy alloys; microstructure; EBSD; recrystallization;

    Abstract : The recently emerging high-entropy alloys (HEAs) present a novel alloying strategy, significantly expanding the scope of metal alloy design. HEAs are defined as alloys consisting of at least four principal elements in equi- or near equiatomic ratios, with a possibility of small amounts of alloying elements. READ MORE

  4. 2. Rapid solidification behaviour of Fe and Al based alloys

    Author : Sathees Ranganathan; Hasse Fredriksson; Zhongyun Fan; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Rapid solidification; Melt spinning; Metastable phases; Fe based alloys.; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik;

    Abstract : Rapid solidification experiment on Fe-Cr-Mo-Mn-Si-C alloy was performed to investigate metastable phases formed during the solidification. A wide range of cooling rate was used to analyse the sample from melt spinning technique (~107 K/s) to water quenching method (~102 K/s). READ MORE

  5. 3. On the hot crack formation during solidification of iron-base alloys

    Author : Karin Hansson; KTH; []
    Keywords : hot cracking; hot tearing; cracking fracturing ; tearing; ductility; brittleness; embrittlement; fractures; ductile brittle transition; solidification; iron; copper; nickel; Invar; steels; free machining steels; stainless steels; penetration; crack;

    Abstract : Hot cracking during solidification is a severe problem inmany casting processes, for example in continuous casting.Combinations of low strength and low ductility of the materialat high temperatures and applied tensile stress can cause hotcracking. READ MORE

  6. 4. Slag inclusion formation during solidification of steel alloys and in cast iron

    Author : Sofia Adolfi; Hasse Fredriksson; Karin Hansson; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; solidification; segregation; precipitation; inclusions; inoculation; EMPA; Other materials science; Övrig teknisk materialvetenskap;

    Abstract : This thesis explores the formation of segregation and inclusions during solidification of steel and cast iron. A better understanding of the formation mechanism should result in decreasing fraction of defects during solidification of ingot and strand material. READ MORE

  7. 5. Characteristics of cast magnesium alloys : microstructures, defects and mechanical properties

    Author : Haiping Cao; Anders Jarfors; Linköpings universitet; []
    Keywords : Mg alloys; microstructure; mechanical properties; defects; modelling; segregation bands; hot tear; mould constraint; semi-solid casting.; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : Magnesium is the lightest of all structural metals. As such, and combined  with good mechanical and physical properties, it forms the basis for commercial alloys that have found successful use in a wide variety of applications. READ MORE