Search for dissertations about: "steels with silicon"
Showing result 1 - 5 of 16 swedish dissertations containing the words steels with silicon.
-
1. Understanding the Role of Molybdenum on the Precipitation in PH Stainless Steels
Abstract : The main part of the present work concerns studies of the influence of molybdenum on the microstructure of martensitic PH stainless steels, during ageing at 475°C. A short investigation of the silicon impact has also been conducted. READ MORE
-
2. Material Solutions for Mitigating High Temperature Corrosion in Biomass- and Waste-fired Boilers - Utilizing Novel FeCrAl Alloys and HVAF-sprayed Ni-based Coatings
Abstract : Combustion of biomass and waste for heat and electricity production is a promising alternative to fossil fuels and is thereby an important step towards a more sustainable future. However, due to substantial amounts of alkali- and chlorine-containing species as well as moisture in biomass and waste, the combustion of these results in a highly corrosive environment which accelerates the degradation of steel components in the boiler, drastically increasing the maintenance costs. READ MORE
-
3. On the Machinability of High Performance Tool Steels
Abstract : The continuous development of hot forming tool steels has resulted in steels with improved mechanical properties. A change in alloying composition, primarily a decreased silicon content, makes them tougher and more wear resistant at elevated temperatures. However, it is at the expense of their machinability. READ MORE
-
4. Processing of Nanostructured WC-Co Powders and Sintered Steels
Abstract : Processing of nanostructured WC-Co and W-Co powders,modelling of Fe-Mn-Si alloy, swelling of Fe-Cu alloy, andmechanical properties and sintering of Fe-Mn-Si steels havebeen studied in the present thesis.W-Co precursors made by chemical synthesis were used toproduce nanostructured WCCo and W-Co powders by calcination,reduction and carburization. READ MORE
-
5. High Resolution Microanalysis of Creep Resistant 9-12% Chromium Steels
Abstract : This thesis deals with detailed studies of the microstructure of 9-12% chromium steels. Three alloys with improved creep resistance have been studied in different stages of heat treatment and after creep testing. Two of them were manufactured using PM/HIP and were of the type 10. READ MORE