Search for dissertations about: "superalloy"

Showing result 1 - 5 of 74 swedish dissertations containing the word superalloy.

  2. 1. Influence of Microstructure on Chip Formation - Machining Aero Engine Alloys

    Author : Stefan Cedergren; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Superalloy; Alloy 718; Ti-6Al-4V; Inconel 718; segmented chip; shear-localization;

    Abstract : Aero engine materials such as nickel-iron and titanium based alloys are known to be very difficult to machine. They are also known to produce shear-localized chips; a type of chip which is associated with both an increase of the tool wear and the vibration levels during machining. READ MORE

  4. 2. Additive Manufacturing using Alloy 718 Powder : Influence of Laser Metal Deposition Process Parameters on Microstructural Characteristics

    Author : Andreas Segerstark; Joel Andersson; Lars-Erik Svensson; Robert Pedersen; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Laser metal deposition; powder; superalloy; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Abstract : Additive manufacturing (AM) is a general name used for production methodswhich have the capabilities of producing components directly from 3D computeraided design (CAD) data by adding material layer-by-layer until a final component is achieved. Included here are powder bed technologies, laminated object manufacturing and deposition technologies. READ MORE

  5. 3. Modelling of the cyclic behaviour of superalloys

    Author : Rebecka Brommesson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; FEM; kinematic hardening; Cyclic plasticity; TMF; superalloy;

    Abstract : In the aviation industry today there is a trend of increasing operating temperatures in turbine engines. The advantages with higher temperatures in the engines are improved performance and efficiency. READ MORE

  6. 4. The effect of workpiece material and its microstructure on tool wear in metal cutting

    Author : Philipp Hoier; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Scanning electron microscopy; Superalloy; Cutting tool; Wear; Cemented carbide; Steel; Machining;

    Abstract : The aim of the present work is to promote the basic understanding of how the workpiece material and its microstructure affect the tool wear during metal cutting. To isolate the effect of the workpiece material, the tool material (uncoated cemented carbide) was kept constant while the workpiece was varied. READ MORE

  7. 5. Influence of Microstructure in Machining of Nickel and Nickel-Iron Based Alloys

    Author : Stefan Olovsjö; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Wear mechanisms; Simulation; Tool wear; Burr; Meta-modelling; Inconel 718; Metal cutting; Superalloy; Waspaloy; Chip morphology; Notch wear; Alloy 718; JMatPro;

    Abstract : Superalloys are used in applications such as turbines, steam power plants and nuclear power systems in components that require good high temperature properties and/or corrosion resistance. They are classified as difficult-to-cut materials and hence, from a sustainable production point of view, tool wear and tool life are major factors when machining these alloys. READ MORE