Search for dissertations about: "up-hill teeming"

Found 4 swedish dissertations containing the words up-hill teeming.

  2. 1. Heat transfer,inclusion characteristics and fluid flow phenomena during up-hill teeming

    Author : Robert Eriksson; KTH; []
    Keywords : Laser flash method; thermal diffusivity; slags; inclusions; water model; ingot casting; up-hill teeming;

    Abstract : Clean steel production requires good control of the sizedistribution and the composition of the inclusions at allstages of the steel making process. So far, there exists verylittle information on the behavior of the inclusion populationduring ingot casting of steel. READ MORE

  4. 2. Effect of swirling blade on flow pattern in nozzle for up-hill teeming

    Author : Line Hallgren; Pär Jönsson; Jonas Alexis; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; up-hill teeming; nozzle; casting; fluid flow; modelling; CFD; LDA.; Metallurgical process engineering; Metallurgisk processteknik;

    Abstract : The fluid flow in the mold during up-hill teeming is of great importance for the quality of the cast ingot and therefore the quality of the final steel products. At the early stage of the filling of an up-hill teeming mold, liquid steel enters, with high velocity, from the runner into the mold and the turbulence on the meniscus could lead to entrainment of mold flux. READ MORE

  5. 3. A Study of the Initial Mould Filling during Up-hill Ingot Casting

    Author : Line Hallgren; Pär Jönsson; Anders Tilliander; Seppo Louhenkilpi; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; up-hill teeming; nozzle; casting; fluid flow; modelling; CFD; LDA; swirl; ingot casting; filling; red eye;

    Abstract : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. READ MORE

  6. 4. Fluid Flow Phenomena, Inclusion Characteristics and some Heat Transfer Phenomena during Filling of an Ingot Mmold

    Author : Robert Eriksson; KTH; []
    Keywords : up-hitt teeming; model powder; inclusions; plant trials; thermal diffusivity; fluid flow; physical modeling;

    Abstract : Clean steel production requires a good understanding of theinclusion characteristics at all stages of the steelmakingprocess. So far there exist little information about theformation and evolution of inclusions during the filling ofingot molds. READ MORE