On deoxidation practice and grain size of austenitic manganese steel

Abstract: The exceptional wear resistance and work hardenability, place Hadfield steel as one of themost important materials for manufacturing cast components used in the mining, crashing,drilling, and excavation industries. In all metallic alloys used for component casting, themechanical properties are highly influenced by the microstructure of the material. Castcomponents with finer microstructural characteristics are known to present bettermechanical properties and reduced risk of defects when compared with components witha coarser microstructure. A reduced grain size in Hadfield steel can increase the strengthof the material up to 30% and reduce the risk of porosity formation during solidification.The practice of adding selected compounds or alloying elements in a metal melt to modifyand refine the microstructure is called inoculation. It is currently one of the trendingmethods utilized in light-metal alloys and cast-iron components production but has not,yet, gained adequate acceptance in the steel casting industry because researchers have notbeen able to find proper inoculants.The main objective of this work is to investigate the qualitative and quantitativecharacteristics of the by-products of deoxidation of Hadfield steel that remain in thematerial after solidification and their positive or negative effect on the coarseness of thefinal as-cast microstructure. This type of research can help to identify the type of particlesor alloying elements that are most effective for refining the microstructure of austeniticsteels and pave the way for developing new or improving conventional deoxidation andinoculation processes that will, in turn, result in the improvement of the properties of thecomponent.The precipitation of particles and the as-cast grain size are studied in aluminum andtitanium deoxidized Hadfield steel samples acquired under pilot scale experimentalconditions. In the first part of this work, the qualitative and quantitative characteristics ofparticles such as type, morphology, composition amount and size are identified. Thesequence of precipitation is established. A model for predicting particle size and growth isdeveloped. The experimental results are compared against thermodynamic equilibriumcalculations and the precipitation mechanisms for each type of particles are described. Inthe second part, the as-cast grain size of samples with varying deoxidation treatments ismeasured. Then, the grain-size is correlated with certain particle characteristic and theparticles are ranked according to their ability to refine the microstructure. The particledisregistry with austenite is calculated and compared to the experimentally acquiredranking.