From recovery boiler to integration of a textile fiber plant Combination of mass balance analysis and chemical engineering

Abstract: Modern chemical technology is an efficient tool for solving problems, particularly within the complex environment of the pulp and paper industry, and the combination of experimental studies, mill data and mass balance calculations are of fundamental importance to the development of the industry. In this study various examples are presented, whereby chemical technology is of fundamental importance.It is well documented that under normal conditions the molten salt mixture from the kraft recovery boiler flows down into the dissolving tank without problems. However, in the case of  alternatives to the kraft recovery boiler, knowledge of more precise data of the molten salts is required for the design calculations. In this study the viscosity for the case of sodium carbonate and 30 mole% sulphide has been measured and is of the magnitude 2 – 3 cP at temperatures relevant for a recovery boiler, i.e. similar to water at room temperature.The presence of non-process elements (NPE) in a typical pulp mill has been investigated. The main input is with regards to the wood, and anticipated problems include; deposits in evaporators, high dead-load in liquor streams, plugging of the upper part of the recovery boiler and decreasing efficiency in the causticization department. Efficient green liquor clarification is of the greatest importance as an efficient kidney for many NPE. Mill data and calculations show that the magnesium added in the oxygen delignification does not form a closed loop.Integration of a prehydrolysis kraft pulp mill producing dissolving pulp with a plant producing viscose textile fiber could be highly beneficial. The prehydrolysis liquor will contain both sugars and acetic acid. It is however not possible to fully replace the sulphuric acid of the viscose spinning bath with acetic acid of own production. The sulphuric chemicals from the viscose plant can be partly taken care of in the kraft recovery area as well as the viscose plant which can be supplied with alkali and sulphuric acid. Zinc-containing effluents from the viscose plant can be treated with green liquor to precipitate zinc sulphide.