Search for dissertations about: "Abaqus"

Showing result 1 - 5 of 38 swedish dissertations containing the word Abaqus.

  1. 1. Numerical simulation of weldment creep response

    University dissertation from Stockholm : Materialvetenskap

    Author : Peter Segle; KTH.; [2002]
    Keywords : ABAQUS; constraint effect; continuum damage mechanics; creep; creep crack growth; design; design code;

    Abstract : In-service inspections of high temperature pressureequipment show that weldments are prone to creep and fatiguedamage. It is not uncommon that severely damaged weldments arefound even before the design life of the component has beenreached. READ MORE

  2. 2. Realistic Package Opening Simulations An Experimental Mechanics and Physics Based Approach

    University dissertation from Karlskrona : Blekinge Institute of Technology

    Author : Eskil Andreasson; Blekinge Tekniska Högskola.; [2015]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Polymer; aluminium foil; semi-crystalline; progressive damage; Abaqus;

    Abstract : A finite element modeling strategy targeting package opening simulations is the final goal with this work. The developed simulation model will be used to proactively predict the opening compatibility early in the development process of a new opening device and/or a new packaging material. READ MORE

  3. 3. Robust Preconditioners Based on the Finite Element Framework

    University dissertation from Uppsala : Acta Universitatis Upsaliensis

    Author : Erik Bängtsson; Uppsala universitet.; Uppsala universitet.; [2007]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; FEM; iterative solution method; algebraic multilevel preconditioner; sparse approximate inverse; block preconditioner; Schur complement approximation; nonsymmetric saddle point matrix; isostatic glacial adjustment; pre-stress advection; elasticity; viscoelasticity; in compressible solid; ABAQUS; BEM DDM; Scientific Computing; Beräkningsvetenskap;

    Abstract : Robust preconditioners on block-triangular and block-factorized form for three types of linear systems of two-by-two block form are studied in this thesis.The first type of linear systems, which are dense, arise from a boundary element type of discretization of crack propagation problems. READ MORE

  4. 4. Simulation of mechanical cutting

    University dissertation from Luleå : Luleå tekniska universitet

    Author : Vahid Kalhori; [2000]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Datorstödd maskinkonstruktion; Computer Aided Design;

    Abstract : This thesis deals with simulation of mechanical cutting. It focuses on orthogonal cutting. Thus it is possible to use two-dimensional models. The strong thermo-mechanical coupling must be accounted for in the model. READ MORE

  5. 5. Modelling the viscoplastic properties of carbon black filled rubber A finite strain material model suitable for Finite Element Analysis

    University dissertation from Stockholm : US-AB

    Author : Rickard Österlöf; KTH.; [2016]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; reinforcing fillers; rubber; finite strain; viscoplastic; förstärkande fyllmedel; gummi; finita töjningar; viskoplastisk; Farkostteknik; Vehicle and Maritime Engineering;

    Abstract : An increased environmental awareness, legal demands and the large part of total costs attributable to fuel cost are all incentives for the automotive industry to reduce fuel consumption. The optimal driveline to enable this reduction depends on the operational conditions and the available infrastructure. READ MORE