Search for dissertations about: "Alloy 800"

Showing result 1 - 5 of 18 swedish dissertations containing the words Alloy 800.

  2. 1. High strain rate deformation of Alloy 718

    Author : Joakim Johansson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Split-Hopkinson; Alloy 718; Johnson-Cook;

    Abstract : Alloy 718 is a high temperature alloy, used where high temperature strength or oxidation resistance is required. As the alloy is precipitate heat treatable it is possible to have a large variety of strength depending on microstructure. READ MORE

  4. 2. Evolution of Microstructure in Two Austenitic Alloys at High Temperatures

    Author : Jenny M Erneman; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; N ; Thermo-Calc; Nb C; gamma prime; DICTRA; APFIM; quantitative metallography; AISI 347; Alloy 800; energy filtered TEM; sigma phase;

    Abstract : A niobium stabilised AISI 347 austenitic stainless steel was investigated after static ageing and creep deformation at temperatures between 500°C and 800°C for times up to 88 000 h. Coarse and fine NbX precipitates and also s-phase precipitates were formed in the temperature range 500-700°C. READ MORE

  5. 3. Machinability variations in Alloy 718 —With focus on machining of turbine components

    Author : Pajazit Avdovic; Industriell Produktion; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polar diagram; flank wear; ceramic tool; variation in material; tool wear; tool life; machinability; Inconel; Alloy 718; Machining; notch wear;

    Abstract : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). READ MORE

  6. 4. High strain rate deformation of Alloy 718, Influence of Microstructure on Mechanical Properties

    Author : Joakim Johansson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Alloy 718; Adiabatic shear localisation; Split-Hopkinson; Johnson-Cook;

    Abstract : Alloy 718 is a high temperature alloy, used where high temperature strength or oxidation resistance is required. As the alloy is precipitate heat treatable, it is possible to have a large variety of deformation and mechanical properties depending on microstructure. READ MORE

  7. 5. High Temperature Corrosion Behaviour of Ni-base Alloys and FeCrAl Alloys – The Influence of Water Vapour

    Author : Tommy Sand; Chalmers tekniska högskola; []
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cr-evaporation; FeCrAl alloy; Oxidation; Chromia scale; Alumina scale; High-temperature corrosion; Ni-base alloy;

    Abstract : Electricity production, transportation, and manufacturing industry are some of the largest sources of greenhouse gas emissions. In many cases, these processes are carried out at high temperature and energy efficiency is limited by material degradation, so-called ‘high-temperature corrosion’. READ MORE