Search for dissertations about: "Bainitic structure"
Found 4 swedish dissertations containing the words Bainitic structure.
-
1. The Metallurgical Aspects of Machinability in Prehardened Mould Steels
Abstract : High economical efficiency obtained by utilizing prehardened mould steels in plastic mould making has increased the usage of these types of steels to a great extent. Generally, prehardened mould steels are applied for large moulds and moulds for moderate production runs, and one of the advantages of using this type of steel is that no heat treatment is necessary for putting the mould in use. READ MORE
-
2. Thermal Stability and Mechanical Properties of Bainitic Steel
Abstract : For material design it is important to understand and establish the relations between the processing of the steel, the resulting microstructure and how that correlate to the properties of the steel. The main focus of this thesis has been to increase this knowledge for low alloy bainitic steels with medium to high carbon content. READ MORE
-
3. White Layer Formation during Hard Turning of Through-Hardened Martensitic and Bainitic AISI 52100 Steel
Abstract : Increased demands for flexible manufacturing lines, shorter cycle times and reduced impact on the environment drives the need for optimization of today’s manufacturing. For machining of hardened steel parts (>45 HRC), grinding has been the obvious choice for many decades. However, hard turning has often been considered as a replacement due to e. READ MORE
-
4. Rapid solidification behaviour of Fe and Al based alloys
Abstract : Rapid solidification experiment on Fe-Cr-Mo-Mn-Si-C alloy was performed to investigate metastable phases formed during the solidification. A wide range of cooling rate was used to analyse the sample from melt spinning technique (~107 K/s) to water quenching method (~102 K/s). READ MORE