Search for dissertations about: "Boiling heat transfer"
Showing result 1 - 5 of 50 swedish dissertations containing the words Boiling heat transfer.
-
1. Flow Boiling Heat Transfer in Single Vertical Channels of Small Diameter
Abstract : Microchannel heat exchangers present many advantages, such as reduced size, high thermal efficiency and low fluid inventory; and are increasingly being used for heat transfer in a wide variety of applications including heat pumps, automotive air conditioners and for cooling of electronics.However, the fundamentals of fluid flow and heat transfer in microscalegeometries are not yet fully understood. READ MORE
-
2. Pool Boiling on Structured Surfaces: Heat Transfer and Critical Heat Flux : Experiments and Mechanistic Modelling
Abstract : In this thesis, pool boiling heat transfer was experimentally studied on structured surfaces with dielectric liquids (HFE-7200, NOVEC-649, FC-72), organic liquids (Acetone, Pentane) and deionized water.In the first step, nanoparticle coatings on copper surfaces were prepared by an electrophoretic deposition method, with Cu-Zn nanoparticles (100 nm) and Cu nanoparticles (150 nm). READ MORE
-
3. Flow Boiling Heat Transfer and Pressure Drop. Experiments and Model Development for Complex Geometries
Abstract : Two very different evaporator geometries, a dimple plate and a herringbone microfin tube, have been studied. Heat transfer and pressure drop for both pure refrigerants and refrigerant mixtures have been determined experimentally. READ MORE
-
4. On Heat and Paper : From Hot Pressing to Impulse Technology
Abstract : Impulse technology is a process in which water is removedfrom a wet paper web by the combined action of mechanicalpressure and intense heat. This results in increased dewateringrates, increased smoothness on the roll side of the sheet, andincreased density. READ MORE
-
5. Some two-phase flow and boiling heat transfer characteristics in small diameter tubes
Abstract : .... READ MORE