Search for dissertations about: "Byggteknik"

Showing result 1 - 5 of 62 swedish dissertations containing the word Byggteknik.

  2. 1. Experimental characterization and numerical modeling of compression perpendicular to the grain in wood and cross-laminated timber

    Author : Shaheda T. Akter; Thomas K. Bader; Erik Serrano; Jan Oscarsson; Reinhard Brandner; Linnéuniversitetet; []
    Keywords : rolling shear; biaxial testing; stress combination; RT-plane; moisture influence; rolling shear creep; digital image correlation; strain field; CLT connection; rotational stiffness; rullskjuvning; biaxiell undersökning; spänningskombination; RT-plan; fuktpåverkan; krypning vid rullskjuving; digital bildkorrelation; töjningsfält; KLTanslutning; rotationsstyvhet; Byggteknik; Civil engineering;

    Abstract : Compression perpendicular to the grain (CPG) of wood is a typical loading situation in timber structures. It has been an extensively studied research topic for decades, due to the highly ductile behavior of wood under such loading, the large variations in mechanical properties, and the relevance of these properties in structural design. READ MORE

  4. 2. Modelling and strength grading of structural timber and glulam lamellae on the basis of optical scanning and dynamic excitation

    Author : Andreas Briggert; Anders Olsson; Jan Oscarsson; Mikael Perstorper; Linnéuniversitetet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fibre direction; finger joint; machine strength grading; knots; tracheid effect; Norway spruce; Byggteknik; Civil engineering;

    Abstract : Machine strength grading of sawn timber is a sawmill process in which density, modulus of elasticity (MOE) and bending or tensile strength are predicted such that the timber can be assigned to strength classes. The predictions of these properties are performed using one or several so-called indicating properties (IPs), which represent a board property, or combination of board properties, measured non-destructively. READ MORE

  5. 3. Moisture-induced stress and distortion of wood : A numerical and experimental study of wood's drying and long-term behaviour

    Author : Sara Florisson; Sigurdur Ormarsson; Johan Vessby; Kent Persson; Linnéuniversitetet; []
    Keywords : AGRICULTURAL SCIENCES; LANTBRUKSVETENSKAPER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; LANTBRUKSVETENSKAPER; ENGINEERING AND TECHNOLOGY; AGRICULTURAL SCIENCES; analytical method; calibration; controlled climate; creep; distortion; experimental methodology; FEM; fibre orientation; mechano-sorption; moisture transport; natural climate; Norway spruce; numerical model; three-dimensional; timber beam; validation; wood; Byggteknik; Civil engineering; Forestry and Wood Technology; Skog och träteknik;

    Abstract : With the current advances made in three-dimensional modelling of wood, it is possible to provide an overall picture of moisture flow, and moisture-induced stress and deformations, whereas previously, experiments only provided local measurements. The main aim of the doctoral thesis is to investigate the possibilities of the developed three-dimensional numerical model to predict the behaviour of wood when simultaneously exposed to a mechanical load and a particular climate. READ MORE

  6. 4. Pith location and annual ring detection for modelling of knots and fibre orientation in structural timber : A Deep-Learning-Based Approach

    Author : Tadios Habite; Anders Olsson; Osama Abdeljaber; Jan Oscarsson; Welf Löwe; Julie Cool; Linnéuniversitetet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Sawn timber; Pith location; Deep learning; Artificial neural networks; Convolutional neural network; Conditional generative adversarial network; Knot detection; Knot modelling; Knot reconstruction; Fibre orientation; Annual ring profile; Byggteknik; Civil engineering;

    Abstract : Detection of pith, annual rings and knots in relation to timber board cross-sections is relevant for many purposes, such as for modelling of sawn timber and for real-time assessment of strength, stiffness and shape stability of wood materials. However, the methods that are available and implemented in optical scanners today do not always meet customer accuracy and/or speed requirements. READ MORE

  7. 5. Timber-concrete hybrid structural systems : Examples, long and short-term dynamic monitoring, and numerical analysis

    Author : Carl Larsson; Michael Dorn; Åsa Bolmsvik; Thomas K. Bader; Henrik Danielsson; Linnéuniversitetet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Timber-Concrete Hybrid Structures; Timber Design; Structural Dynamics; Structural Health Monitoring; Byggteknik; Civil engineering;

    Abstract : Timber-concrete hybrid buildings are an innovative solution to increase the amount of timber materials in modern buildings. Due to its lower impact on the environment than materials like steel and concrete, the demand for timber products is rising as the construction industry aims to decrease its environmental footprint. READ MORE