Search for dissertations about: "CFD modeling"
Showing result 21 - 25 of 155 swedish dissertations containing the words CFD modeling.
-
21. Mathematical and Experimental Study on Filtration of Solid Inclusions from Molten Aluminium and Steel
Abstract : Aluminum and steel have been the most produced metal and alloy, respectively, for many years. Their extensive use in various industries, their fundamental role in our everyday life, and their excellent recycling characteristics are the major driving forces for development of their production towards more sustainable processes. READ MORE
-
22. Modeling of Diesel Fuel Spray Formation and Combustion in OpenFOAM
Abstract : The formation, ignition, and combustion of fuel sprays are highly complex processes and the available models have various shortcomings. The development and application of multidimensional CFD models, that describe the different phenomena have rapidly increased through the use of commercial and public software (e.g. READ MORE
-
23. IronArc a New Process for Pig Iron Production : A Numerical and Experimental Investigation Focusing on Mixing
Abstract : I den här studien så var syftet att undersöka omrörningen och relaterade fenomen i den nyutvecklade IronArc processen. Processen använder sig av gasinjektion genom plasmageneratorer för att smälta och reducera en slagg bestående av järnoxid. READ MORE
-
24. Fundamental Experimental and Numerical Investigation Focusing on the Initial Stage of a Top-Blown Converter Process
Abstract : The aim of this thesis work is to increase the knowledge of phenomena taking place during the initial stage in a top blown converter. The work has been done in a few steps resulting in four different supplements. Water model experiments have been carried out using particle image velocimetry (PIV) technology. READ MORE
-
25. On some positive effects of swirling flow for the continuous cast mould billets
Abstract : Continuous caster moulds are the last and most important stage in the steelmaking process, where inclusions can either be generated or removed. With increasing casting speed using conventional immersion nozzles critical problems, such as unstable bulk mould flow have been noticed. READ MORE