Search for dissertations about: "Chip Microstructure"
Showing result 11 - 15 of 18 swedish dissertations containing the words Chip Microstructure.
-
11. Adhesion Characterization and Reliability Issues of Anisotropic Conductive Adhesives for Microsystem Applications
Abstract : There has been a steadily increasing interest in using electrically conductive adhesives as interconnecting materials in electronics manufacturing. Simple processing, low bonding temperature and fine-pitch capability are the major advantages of conducting adhesive technology. READ MORE
-
12. Fabrication and noise properties of high-Tc SQUIDs with multilayer superconducting flux transformers
Abstract : The thesis describes the development of highTc superconducting quantum interference devices (SQUIDs) with multilayer thin film flux transformers. High-Tc SQUID magnetometers are promising in various biomedical applications, including magnetoencephalography (MEG) and ultra-low field magnetic resonance imaging (ulf-MRI). READ MORE
-
13. Characterization of WC-Co tools used for machining of Alloy 718 under the influence of high-pressure coolant supply
Abstract : The use of high-pressure jets for supply of coolant to the cutting zone has the potential to significantly increase the productivity and process stability when machining difficult-to-cut materials such as Ni-based superalloys. Apart from better chip-breakability, the jets enable the coolant to reach closer to the cutting edge and hence enhance its capability to dissipate heat. READ MORE
-
14. The Josephson parametric oscillator - From microscopic studies to single-shot qubit readout
Abstract : Circuit quantum electrodynamics (cQED) is a prominent platform for quantum information processing, in which microwave photons are confined into resonant cavities coupled to superconducting quantum bits (qubits). The large effective dipole moment of the qubit, in combination with the high energy density of the quasi 1-D resonator allow these systems to enter the so-called strong coupling regime. READ MORE
-
15. Structural Modifications in Spruce Wood during Steam Explosion Pretreatment
Abstract : The rising price of petroleum and environmental concerns regarding CO2 emissions have increased interest in alternative renewable resources. Biomass can be considered as an excellent alternative raw material. A biorefinery uses biomass and produces fuel, energy, and valueadded chemicals. READ MORE