Search for dissertations about: "Converter Control"
Showing result 11 - 15 of 185 swedish dissertations containing the words Converter Control.
-
11. Network Synchronization and Control Based on Inverse Optimality : A Study of Inverter-Based Power Generation
Abstract : This thesis dwells upon the synthesis of system-theoretical tools to understand and control the behavior of nonlinear networked systems. This work is at the crossroads of three topics: synchronization in coupled high-order oscillators, inverse optimal control and the application of inverter-based power systems. READ MORE
-
12. Thermal and State-of-Charge Balancing of Batteries using Multilevel Converters
Abstract : Driven by the needs to reduce the dependence of fossil fuels and the emissions of conventional vehicles there has in recent years been an increasing interest in battery-powered electrified vehicles (xEVs). In xEVs, the battery pack, built from many small cells, is one of the most expensive components in the powertrain. READ MORE
-
13. Parameter and State Estimation with Information-rich Signals
Abstract : The complexity of industrial systems and the mathematical models to describe them increases. In many cases, point sensors are no longer sufficient to provide controllers and monitoring instruments with the information necessary for operation. The need for other types of information, such as audio and video, has grown. READ MORE
-
14. Control and Design Aspects of Components and Systems in High-Voltage Converters for Industrial Applications
Abstract : High-frequency dc-dc converters are widely used in power electronic applications, both in consumer products and industrial products. By operating the converter at higher frequencies both a smaller size and better control characteristics can be obtained. READ MORE
-
15. Modeling and Control of VSC-HVDC Links Connected to Weak AC Systems
Abstract : For high-voltage direct-current (HVDC) transmission, the strength of the ac system is important for normal operation. An ac system can be considered as weak either because its impedance is high or its inertia is low. READ MORE