Search for dissertations about: "Deformation measurement"

Showing result 1 - 5 of 102 swedish dissertations containing the words Deformation measurement.

2. 1. Interferometric 3-D Camera for Shape and Deformation Measurements using Ultra Short Laser Pulses

   Author : Bengt Nilsson; KTH; []
   Keywords : Interferometry; Industrial Metrology; Form measurement; Deformation measurement;

   Abstract : .... READ MORE

4. 2. Torque and Angle Controlled Tightening of Bolted Joints

   Author : Göran Toth; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; torque controlled tightening; deformation parameters; momentary elongation; deformation factor; torque; Bolted screwed joints; spring characteristic; Torx; torque and angle controlled tightening; hexalobular; final torque; snug torque; Taylor’s series expansions; preload; plastic deformation; permanent elongation; yield; friction diameter; plastic spring constant; clevis; turn-of-nut method; bearing surface pressure; twisting; Monte-Carlo simulations;

   Abstract : Reduced weight and fuel consumption, improved reliability and engine performance are the main requirements in the automotive industry of today. These requirements demand robust and optimized bolted joints, where a high amount of preload obtained by effective utilisation of the bolt is essential. READ MORE

5. 3. Three-Dimensional Load-Deformation Relationships of Arbitrarily Loaded Coiled Springs

   Author : Lars Lindkvist; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; extended stiffness model; helical spring; non-linear deformation; stiffness matrix; coiled spring; arbitrary load; large deformation; three-dimensional;

   Abstract : This paper reports the development of a computer based tool that can be used to predict the three-dimensional load-deformation relationships of arbitrarily loaded coiled springs. The non-linear deformation of the spring is calculated by dividing the spring into small elements for which the load-deformation relationships can be considered to be linear. READ MORE

6. 4. On the deformation behavior and cracking of ductile iron; effect of microstructure

   Author : Keivan Amiri Kasvayee; Anders E.W. Jarfors; Jens Bergström; Jönköping University; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spherical graphite iron; component casting; high silicon ductile iron; digital image correlation DIC ; in-situ tensile testing; in-situ cyclic testing; DIC pattern generation; pit etching; micro-scale deformation; micro-crack; finite element analysis FEA ; focused ion beam FIB milling; segjärn; komponentgjutning; högkisellegerat segjärn; digital image correlation DIC ; insitu dragprovning; in-situ cyklisk provning; DIC-mönstergenerering; grop-etsning; mikroskalig deformation; mikrosprickor; finite element analys FEA ; fokuserad jonstråle FIB avverkning;

   Abstract : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. READ MORE

7. 5. Hydromechanical Behaviour of Fractures Close to Tunnels in Crystalline Rock

   Author : Johan Thörn; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Fracture stiffness; Fracture geometry; Laboratory experiments; Äspö HRL; Rock stress; In situ; Deformation measurement; Hallandsås; Hydromechanical coupling; Geological history;

   Abstract : The deformation and stiffness properties of rock fractures are important measurable parameters when describing their hydromechanical behaviour. Deformation refers to aperture change. Stiffness refers to the amount of deformation per stress change to which a fracture is subjected. READ MORE