Search for dissertations about: "Deformation"
Showing result 16 - 20 of 1095 swedish dissertations containing the word Deformation.
-
16. P-T evolotion and High-temperature deformation of Precambrian eclogite, Sveconorwegian orogen
Abstract : The 1.1-0.9 Ga Sveconorwegian orogen is one of several Grenvillian-aged orogenic belts that mark the amalgamation of supercontinent Rodinia. The highest-pressure rocks in the Sveconorwegian orogen are eclogites in the Eastern Segment (SW Sweden). READ MORE
-
17. Influences of the Graphite Phase on Elastic and Plastic Deformation Behaviour of Cast Irons
Abstract : The amount and morphology of the graphite phase largely controls the resulting properties of cast iron. For instance, in flake graphite cast irons the mechanical properties are low while the thermal conductivity is high. READ MORE
-
18. Three-Dimensional Load-Deformation Relationships of Arbitrarily Loaded Coiled Springs
Abstract : This paper reports the development of a computer based tool that can be used to predict the three-dimensional load-deformation relationships of arbitrarily loaded coiled springs. The non-linear deformation of the spring is calculated by dividing the spring into small elements for which the load-deformation relationships can be considered to be linear. READ MORE
-
19. Analyses of Resilient Behavior of Unbound Materials for the Purpose of Predicting Permanent Deformation Behavior
Abstract : Post compaction is the unintended compaction of the unbound material that commences immediately after a road is brought into service and caused by densification of the material. Analogies to this post compaction can also be seen in laboratory and field tests. READ MORE
-
20. On the deformation behavior and cracking of ductile iron; effect of microstructure
Abstract : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. READ MORE