Search for dissertations about: "Dynamic strain ageing"

Showing result 1 - 5 of 10 swedish dissertations containing the words Dynamic strain ageing.

  1. 1. The Plastic Flow Behaviour of Aluminium Alloys Exhibiting Dynamic Strain Ageing

    Author : Magnus Hörnqvist; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dynamic strain ageing; Portevin-Le Chatelier effect; Temperature sensitivity; Strain rate sensitivity; Al-Zn-Mg; Thermal activation;

    Abstract : The phenomenon known as dynamic strain ageing, abbreviated DSA, has been known since the beginning of last century. It was first discovered as serrations in the load-elongation curve obtained upon deforming specimens of certain alloys in tension. This phenomenon became known as the Portevin-Le Chatelier (PLC) effect. READ MORE

  2. 2. Monotonic and Cyclic Plastic Deformation of High-Strength Aluminium Alloys

    Author : Magnus Hörnqvist; [2008]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EN AW-7030; Heat treatment; Temperature effects; Dynamic precipitation.; Strain hardening; Precipitation hardening; Low cycle fatigue; Strain rate effects; AA7030; Al-Zn-Mg; Plastic deformation; Dynamic strain ageing; Mechanical properties;

    Abstract : Dynamic strain ageing (DSA) and dynamic precipitation (DP) are two, closely interrelated, phenomena arising from the dynamic interaction between mobile solute atoms and dislocations. The occurrence of DSA and DP is confined to specific ranges of strain rate and temperature, and aluminium alloys are generally prone to experience DSA and DP already at ambient temperatures and conventional strainrates. READ MORE

  3. 3. Improved Material Models for High Strength Steel

    University dissertation from Linköping : Linköping University Electronic Press

    Author : Rikard Larsson; Linköpings universitet.; Linköpings universitet.; [2011]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Plastic anisotropy; non-linear strain paths; mixed isotropic-kinematic hardening; isotropic-distortional hardening; dynamic strain ageing; static strain ageing; marten- sitic transformation;

    Abstract : The mechanical behaviour of the three advanced high strength steel grades, Docol 600DP, Docol 1200M and HyTens 1000, has been experimentally investigated under various types of deformation, and material models have been developed, which account for the experimentally observed behaviour.Two extensive experimental programmes have been conducted in this work. READ MORE

  4. 4. Influence of waxes on bitumen and asphalt concrete mixture performance

    University dissertation from Stockholm : KTH

    Author : Ylva Edwards; KTH.; [2005]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; bitumen; asphalt; additives; wax in bitumen; polyphosphoric acid in bitumen; rheology; IR-spectroscopy; dynamic mechanic analysis DMA ; bending beam rheometer BBR ; literature study; low temperature physical hardening; highway materials; morphology; modified bitumens; temperature susceptibility; low temperature performance; ageing; microscopy; chromatography; Fourier transform infrared spectroscopy; force ductility; conventional binder tests; asphalt performance; tensile strain restrained specimen test TSRST ; TECHNOLOGY Civil engineering and architecture Building engineering; TEKNIKVETENSKAP Samhällsbyggnadsteknik och arkitektur Byggnadsteknik;

    Abstract : This doctoral thesis consists of a literature review, presented in two papers, and another six papers describing experimental studies of the influence of different kinds of wax and polyphosporic acid on bitumen and asphalt concrete mixture properties.The literature review should give an extensive description of the field of knowledge concerning wax in bitumen. READ MORE

  5. 5. High-Temperature Behaviour of Austenitic Alloys Influence of Temperature and Strain Rate on Mechanical Properties and Microstructural Development

    University dissertation from Linköping : Linköping University Electronic Press

    Author : Mattias Calmunger; Linköpings universitet.; Linköpings universitet.; [2013]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Abstract : The global increase in energy consumption and the global warming from greenhouse gas emission creates the need for more environmental friendly energy production processes. Biomass power plants with higher efficiency could generate more energy but also reduce the emission of greenhouse gases, e.g. CO2. READ MORE