Search for dissertations about: "Elektroteknik"

Showing result 1 - 5 of 3718 swedish dissertations containing the word Elektroteknik.

2. 1. DC-DC Converters - Dynamic Model Design and Experimental Verification

   University dissertation from Department of Industrial Electrical Engineering and Automation, Lund Institute of Technology

   Author : Bengt Johansson; Lunds universitet.; Lund University.; [2005]
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; robotics; buck; dc-dc converter; modeling; audio susceptibility; current-mode control; load current; gain scheduling; current transformer; experimental verification; Electronics and Electrical technology; Automation; Elektronik och elektroteknik; Elektroteknik; Electrical engineering; reglerteknik; robotteknik; Automatiska system; control engineering;

   Abstract : To obtain high performance control of a dc-dc converter, a good model of the converter is needed. The load usually affects the dynamics and one way to take this into consideration is to regard the load as a part of the converter. The load is often the most variable part of this system. READ MORE

4. 2. Dynamic Power System Load -Estimation of Parameters from Operational Data

   University dissertation from Department of Industrial Electrical Engineering and Automation, Lund Institute of Technology

   Author : Ines Romero; Lunds universitet.; Lund University.; [2005]
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; control engineering; robotics; Automation; large disturbances; Load modeling; normal operation; voltage stability; dynamic load models; modeling and identification; normalization in reactive load models; Elektronik och elektroteknik; Electronics and Electrical technology; Automatiska system; robotteknik; reglerteknik; Electrical engineering; Elektroteknik;

   Abstract : The significance of load modeling for voltage stability studies has been emphasized by several disturbances, which have taken place in the past years. They have shown that the loads in combination with other dynamics are among the main contributors of prolonged low voltage conditions, voltage instability and collapse in the power system. READ MORE

5. 3. Millimeter Wave Imaging and Phased Array Antennas for 5G and Aerospace Applications

   University dissertation from Department of Electrical and Information Technology, Lund University

   Author : Jakob Helander; Lunds universitet.; Lund University.; [2019]
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 5G; phased array; Millimeter wave antenna arrays; millimeter wave imaging; Computational Electromagnetics; Non-destructive testing NDT ; compressive sensing;

   Abstract : Phased array antennas are cornerstones in many proposed antenna solutions concerning the next generation of both airborne radar systems and wireless communication systems (5G). Additionally, millimeter wave (mm-wave) frequencies are expected to play an integral role in 5G, and are deemed well-suited for inspecting structural components used in the aerospace industry. READ MORE

6. 4. Power System Oscillations - Detection, Estimation and Control

   University dissertation from Department of Industrial Electrical Engineering and Automation, Lund Institute of Technology

   Author : Morten Hemmingsson; Lunds universitet.; Lund University.; [2003]
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Elektroteknik; oscillation; power system; damping; power swing; distance protection; detection; estimation; real-time; reactive co-variation; control; Electrical engineering; load modulation; Automation; robotics; control engineering; Automatiska system; robotteknik; reglerteknik;

   Abstract : The topic of this thesis is the electro-mechanical oscillations which to some extent always are present in a power system. The demand of electric power is ever increasing. At the same time, the tolerance of disruptions in the power supply is decreasing. READ MORE

7. 5. Design, Modelling and Control of Electrical Machines - With Applications to Iron-powder Machines and Acoustic Noise

   University dissertation from Department of Industrial Electrical Engineering and Automation, Lund Institute of Technology

   Author : David Martinez; Lunds universitet.; Lund University.; [2005]
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; BEM; induction machine; noise prediction; vector control; acoustic noise; HEV; series magnetization; leakage reduction; thermal model; FEM; MEC; claw-poles; SMC; slip-ring-less machine; sound intensity measurements; vibration; Electrical engineering; Elektroteknik;

   Abstract : Popular Abstract in Swedish Avhandlingen består av två delar, den första som behandlar konstruktionen av järn-pulver maskiner, och den andra med analys av ljud från el-maskiner. I Del I, en elektrisk magnetiserad klo-pol synkron maskin på 1.6 kW har byggts. Maskinen är byggt från mjuk magnetisk material (SMC), också kallad järn-pulver. READ MORE