Search for dissertations about: "Elisabet Brännvall"

Showing result 1 - 5 of 9 swedish dissertations containing the words Elisabet Brännvall.

2. 1. Aspects on Strenght Delivery and Higher Utilisation of the Strength Potential of Kraft Pulp Fibres

   Author : Elisabet Brännvall; Mikael Lindström; Herbert Sixta; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cellulose and paper engineering; Cellulosa- och pappersteknik;

   Abstract : Studies on strength delivery and related fields have so far concentrated on finding the locations in the mill where fibres are damaged and what the damages consist of. However, fibres will invariably encounter mechanical stresses along the fibreline and in this thesis a new concept is introduced; the vulnerability of fibres to mechanical treatment. READ MORE

4. 2. The effects of fines content and hydrogen sulphide gas pre-treatment on kraft pulping and the strength of polysulphide pulps

   Author : Elisabet Brännvall; KTH; []
   Keywords : Bleachhability; Delignification; Fines; Hydrogen sulphide pre-treatment; Kraft pulping; Mechanical properties; Polysulphide; Softwood; Yield; NATURAL SCIENCES; NATURVETENSKAP;

   Abstract : .... READ MORE

5. 3. Biobased carbon fibers from solution spun lignocellulosic precursors

   Author : Andreas Bengtsson; Monica Ek; Maria Sedin; Elisabet Brännvall; Elisabeth Sjöholm; Johannes Ganster; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Carbon fiber; Carbonization; Cellulose; Kraft pulp; Softwood kraft lignin; Solution spinning; Stabilization; Barrvedslignin; Cellulosa; Karbonisering; Kolfiber; Lösningsmedelsspinning; Stabilisering; Sulfatmassa; Fiber- och polymervetenskap; Fibre and Polymer Science;

   Abstract : Carbon fibers (CFs) have excellent mechanical properties and a low density, making themattractive as a reinforcing fiber in composites. The use of CFs is limited to high-end applications,since they are produced from an expensive fossil-based precursor via an energy-intensivemanufacturing process, explaining the need for cheaper CFs from renewables. READ MORE

6. 4. Pulp strength enhancement by oxygen delignification

   Author : Claudia Esteves; Elisabet Brännvall; Olena Sevastyanova; Sören Östlund; Christine Chirat; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fiber charge; morphology; oxygen delignification; swellability; tensile properties; dragegenskaper; fiberladdningar; morfologi; svällningsförmåga; syrgasdelignifiering; Chemical Engineering; Kemiteknik;

   Abstract : Oxygen delignification is widely used in the pulp and paper industry as a part of delignification process between the kraft cook and bleaching. However, its potential has not been fully utilized. READ MORE

7. 5. Characterization of Spruce Xylan and Its Potential for Strength Improvement

   Author : Zheng Jansson; Elisabet Brännvall; Mikael Lindström; Hannes Vomhoff; Ulrica Edlund; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; xylan; paper strength;

   Abstract : Xylan dissolved during kraft cooking and later redeposited on fibre surfaces has been shown to give higher pulp yield and better strength properties. This is economically interesting from an industrial point of view. READ MORE