Search for dissertations about: "Engineering and Technology Chemical Engineering Corrosion Engineering"

Showing result 6 - 10 of 180 swedish dissertations containing the words Engineering and Technology Chemical Engineering Corrosion Engineering.

  2. 6. High Temperature Corrosion of Superheaters in Biomass - and Waste-Fired Boilers: Combat on two fronts

    Author : Julien Phother Simon; Chalmers tekniska högskola; []
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stainless steel; KCl; Deposits; Waste; Oxidation; Biomass; Ni-based coatings;

    Abstract : Carbon dioxide is a greenhouse gas contributing to the greenhouse effect and a significant contribution comes from the use of fossil fuels. Utilizing more renewable fuels is therefore a solution to decrease the net release of CO2 emissions to the atmosphere. READ MORE

  4. 7. Influence of deformation and environmental degradation of Inconel 792

    Author : Jan-erik Kanesund; Christer Burman; Linköpings universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Abstract : Industrial gas turbines are often used as a mechanical drive for pumps and compressors or in power generation as an electric power supply. The gas turbine has for many years been a popular engine due to its flexibility with respect to different types of fuel and due to a design, that enables a high power-to-weight ratio. READ MORE

  5. 8. Corrosion of steel bars in fibre reinforced concrete: corrosion mechanisms and structural performance

    Author : Carlos Gil Berrocal; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; residual flexural capacity; chloride-induced corrosion; electrical resistivity; Fibre reinforced concrete; reinforcement bond; durability; cracking;

    Abstract : The viability of employing fibre reinforcement to improve the durability performance of RC structures by delaying and/or reducing rebar corrosion and by mitigating the structural impact of corrosion-induced damage have been investigated. Given the enhanced crack control of FRC, it could be advantageous to use fibres in civil engineering structures to decrease the ingress of corrosion-initiation substances. READ MORE

  6. 9. Atmospheric corrosion of Mg and MgAl alloys – characterization and mechanisms

    Author : Mehrdad Shahabi Navid; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EDX; CO2; XPS; Mg and MgAl alloys; NaCl; Atmospheric corrosion; Characterization; 3D imaging; SEM; BIB; Thin film; FTIR; XRD; Pitting; Interference microscopy; FIB;

    Abstract : The atmospheric corrosion of Mg and MgAl alloys was investigated. Corrosion tests were performed in the laboratory under controlled environment. CP Mg, AM50 and AZ91 samples were exposed at 95% RH and 22°C in the presence and in the absence of 400 ppm CO2 for 24 h to 672 h. The passive film was characterized by means of XPS, FTIR, AES and XRD. READ MORE

  7. 10. Co-firing animal waste, sludge, residue wood, peat and forest fuels in a 50MWth CFB boiler : ash transformation, availability and process improvements

    Author : Henrik Hagman; Dan Boström; Rainer Backman; Anders Nordin; Umeå universitet; []
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Co-combustion; animal waste; peat; waste wood; forest residues; industrial sludge; limestone; CFB boiler; ash transformation; corrosion; erosion; ash and deposit characteristics; deposit buildup; boiler failures; availability; sulfation; boiler design; boiler conversion; waste derived fuels; large scale; Samförbränning; animaliskt avfall; torv; returträ; skogsbränsle; reningsslam; askomvandling; korrotion; erosion; ask- och beläggnings-karaktäristik; beläggningstillväxt; tillgänglighet; sulfatisering; panndesign; pannkonvertering; avfallsderiverade bränslen; storskalig;

    Abstract : The direct variable costs for heat and electricity production based on solid biomass fuel combustion is approximately 3-5 times lower than the costs in a fossil fuel-oil based boiler in Sweden. In addition waste derived biomass fuels are typically much cheaper than biomass not classified as waste. READ MORE