Search for dissertations about: "Fatigue crack initiation"
Showing result 1 - 5 of 86 swedish dissertations containing the words Fatigue crack initiation.
-
1. Oxidation, Creep and Fatigue Synergies in Cast Materials for Exhaust Manifolds
Abstract : The future development of engines of heavy-duty vehicles towards reduced CO2 emission will increase the exhaust gas temperature and render the exhaust atmosphere more corrosive. The current service material of exhaust gas components - a ferritic ductile cast iron called SiMo51 - will soon meet its upper-temperature limit. READ MORE
-
2. Rolling Contact Fatigue of Railway Rails with Emphasis on Crack Initiation
Abstract : Increased traffic density and the heavier axle loads of modern trains have led to severe problems with rolling contact fatigue (RCF) which cause initiation of surface cracks in railheads. In this thesis, a specific type of surface crack, the head check, is studied numerically with emphasis on fatigue crack initiation. READ MORE
-
3. Crack Initiation in Nodular cast Iron
Abstract : .... READ MORE
-
4. Fatigue of Spot Welded Joints: Experiments and Life Predictions
Abstract : Methods to assess the fatigue strength of spot welds in built-up structures are used on a daily basis in the automotive industry. Efficient and reliable numerical methods make it possible to achieve designs with low weight, low manufacturing costs and good durability within short development cycles, since the number of prototypes built can be reduced. READ MORE
-
5. Contact fatigue and crack propagation studies of sintered PM steel
Abstract : Gears made of PM steel are of interest for the automotive industry because from the press/sinter route, complex geometries can be produced to near net shape with only a few processing steps while keeping the material and energy usage at a minimum. However, the PM steels of today have significant performance limitations caused by the inherent porosity which impairs the mechanical properties by acting as stress raisers in the material. READ MORE