Search for dissertations about: "Flank wear"
Showing result 1 - 5 of 25 swedish dissertations containing the words Flank wear.
-
1. Machinability variations in Alloy 718 —With focus on machining of turbine components
Abstract : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). READ MORE
-
2. Optimisation of Machining Operations by means of Finite Element Method and Tailored Experiments
Abstract : Traditionally, costly experimental procedures have been followed in industry to optimise the machining operations to secure the maximum efficiency in production line, while the functional requirements of the machined surfaces are fulfilled. In recent years, development of robust numerical techniques such as Finite Element Method (FEM) and advances in computing capacity of computers have made it possible to simulate the machining operations under operational conditions. READ MORE
-
3. Wear of piston rings in hydrostatic transmissions
Abstract : This study focuses on the wear of piston rings in a hydraulic radial piston motor. The piston ring has to satisfy increasing demands for reliability and longer service life. It has two contacting surfaces, the face and the flank, and operates under a boundary lubrication state. READ MORE
-
4. Influence of Microstructure in Machining of Nickel and Nickel-Iron Based Alloys
Abstract : Superalloys are used in applications such as turbines, steam power plants and nuclear power systems in components that require good high temperature properties and/or corrosion resistance. They are classified as difficult-to-cut materials and hence, from a sustainable production point of view, tool wear and tool life are major factors when machining these alloys. READ MORE
-
5. Machinability variations in alloy 718 turbine components
Abstract : Machinability Variations in Alloy 718 Turbine Components PAJAZIT AVDOVIC Department of Materials and Manufacturing TechnologyChalmers University of Technology AbstractAlloy 718 has a reputation for being very troublesome during the cutting process. It was suspected that this material was too hard and having too fine grain size and that these characteristics caused damage to cutting tools during processing. READ MORE