Search for dissertations about: "Flat plate collector"

Showing result 1 - 5 of 6 swedish dissertations containing the words Flat plate collector.

  1. 1. Calculation and Measurement Methods for the Performance of Solar Collectors. Models of Flat Plate Collectors, Transparent Insulation and Efficiency Factors

    Author : Bengt Hellström; Avdelningen för Energi och byggnadsdesign; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Transparent insulation; Test method; Calculation method; Concentrating collector; Efficiency factor; Fin efficiency; Flat plate collector; Heat conductivity; Honeycomb; Measurement method; Performance; Solar transmittance; Solar collector; Collector model; Energy research; Energiforskning;

    Abstract : This thesis deals with models of flat plate collectors, transparent insulation and efficiency factors. An equation for the energy output from a glazed flat plate collector is derived by modelling the collector efficiency factor, F´ as the sum of a constant and a temperature dependent part. READ MORE

  2. 2. Gas-filled, flat plate solar collectors

    Author : Johan Vestlund; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mechanical stresses; collector material; heated cavity; Modelling; Solar collectors;

    Abstract : This work treats the thermal and mechanical performances of gas-filled, flat plate solar collectors in order to achieve a better performance than that of air filled collectors. The gases examined are argon, krypton and xenon which all have lower thermal conductivity than air. The absorber is formed as a tray connected to the glass. READ MORE

  3. 3. Gas-filled, flat plate solar collectors

    Author : Johan Vestlund; Högskolan Dalarna; []
    Keywords : Solar collectors; Modelling; Mechanical stresses; Heated cavity; collector material; Högeffektiva solfångare för svensk produktion;

    Abstract : This work treats the thermal and mechanical performances of gas-filled, flat plate solar collectors in order to achieve a better performance than that of air filled collectors. The gases examined are argon, krypton and xenon which all have lower thermal conductivity than air. The absorber is formed as a tray connected to the glass. READ MORE

  4. 4. Retrofitted Solar Domestic Hot Water System for Single-Family Electrically-Heated Houses: Development and testing

    Author : Ricardo Bernardo; Institutionen för arkitektur och byggd miljö; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Solar domestic hot water; retrofitting; single family electrically heated houses; high solar fraction; photovoltaic thermal concentrating hybrids; PVT; parabolic reflectors; CPC thermal collector.;

    Abstract : In Sweden, there are roughly half a million single family houses that use electric heating for both domestic hot water production and space heating. Since electricity is the most expensive energy source in Sweden, it is interesting to install a high solar fraction solar thermal system to reduce the energy use in these houses. READ MORE

  5. 5. Load Adapted Solar Thermal Combisystems - Optical Analysis and Systems Optimization

    Author : Svante Nordlander; Högskolan Dalarna; []
    Keywords : Solar Combisystems Concentrating Collector Optimization Incidence Angle Optical Efficiency Simulation TRNSYS Stagnation;

    Abstract : In a northern European climate a typical solar combisystem for a single family house normally saves between 10 and 30 % of the auxiliary energy needed for space heating and domestic water heating. It is considered uneconomical to dimension systems for higher energy savings. Overheating problems may also occur. READ MORE