Search for dissertations about: "Hardening law"

Showing result 1 - 5 of 17 swedish dissertations containing the words Hardening law.

  2. 1. Prediction of springback in sheet metal forming: with emphasis on material modeling

    Author : Per-Anders Eggertsen; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Springback; Hardening law; Elastic degradation; Yield surface; Simulation; Bauschinger effect;

    Abstract : The prediction of springback is probably the area in sheet metal forming simulation, where the least success has been achieved in terms solution accuracy. The springback is caused by the release of the residual stresses in the work piece after the forming stage. READ MORE

  4. 2. Prediction of springback in sheet metal forming

    Author : Per-Anders Eggertsen; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hardening law; Bauschinger effect; Springback; FE-simulation; Yield condition; Elastic stiffness degradation;

    Abstract : The prediction of springback is probably the area in sheet metal forming simulation, where the least success has been achieved in terms solution accuracy. The springback is caused by the release of the stresses in the workpiece after the forming stage. READ MORE

  5. 3. Modelling of Inelastic Effects in Metal Sheets and Identification of Material Parameters

    Author : Edin Omerspahic; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; plasticity; viscoplasticity; MCR mechanism; constitutive modelling; mixed hardening; damage; dynamic yield surface; material parameter identification;

    Abstract : The continuum modelling of the macroscopic behaviour of metallic sheets and the identification of corresponding material parameters for models selected are dealt with in the thesis. Thermodynamics with internal variables provides a framework for the derivation of the models. READ MORE

  6. 4. Modelling and simulation of plastic deformation on small scales : interface conditions and size effects of thin films

    Author : Per Fredriksson; Peter Gudmundson; Christian Niordson; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strain gradient plasticity; Size effects; Thin films; Interface; Finite element method; Dislocations; Constitutive behaviour; Hardening behaviour; Indentation; Contact mechanics; Metal matrix composites; Engineering mechanics; Teknisk mekanik;

    Abstract : Contrary to elastic deformation, plastic deformation of crystalline materials, such as metals, is size-dependent. Most commonly, this phenomenon is present but unnoticed, such as the effect of microstructural length scales. READ MORE

  7. 5. Thermally Conductive High-Density Polyethylene Composites for Ground Heat Exchangers

    Author : Adib Kalantar Mehrjerdi; Högskolan i Borås; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High-density polyethylene; talc; thermal conductivity; thermal diffusivity; thermal stability; melt rheology; oxidation induction time; α relaxation; strain hardening;

    Abstract : Today, the energy used for the heating and cooling of offices, shopping centres, schools, residential areas, andother buildings is as large as 50% of the total energy consumption in the world. The climate change, globalwarming, and environmental issues have forced high requirements for energy efficiency and clean energyproduction in buildings. READ MORE