Search for dissertations about: "Imaging in implants"
Showing result 1 - 5 of 19 swedish dissertations containing the words Imaging in implants.
-
1. X-ray and neutron μCT of biomedical samples: from image acquisition to quantification
Abstract : Even though the validity of x-ray computed tomography in the analysis of biomedical samples is nowadays undisputed, the more recent imaging techniques and more advanced instruments (such as synchrotrons) are still relatively unknown to many medical doctors that could benefit from them.The doctoral work presented in this thesis joins a collective effort from the imaging community to demonstrate potential applications of advanced x-ray and neutron imaging methods to preclinical medical research, with the hope of contributing to reach a “critical mass” in the medical community and in the public opinion as well. READ MORE
-
2. Metal artifacts in computed tomography : impact of reduction methods on image quality and radiotherapy treatment planning
Abstract : Degradation of image quality by metal artifacts is a common problem in computed tomography (CT) imaging, which can limit the diagnostic value of a CT examination and also introduce inaccuracies in radiotherapy (RT) treatment planning. In recent years, commercial metal artifact reduction (MAR) methods have been launched by several CT vendors. READ MORE
-
3. Antennas, Wave Propagation, and Localization in Wireless Body Area Networks
Abstract : A network of communicating wireless devices that are implantable, wearable or within close proximity of a human body is called wireless body area network (WBAN). The propagation channels for the devices in the WBAN are either through the body or over the body. READ MORE
-
4. On customization of orthopedic implants - from design and additive manufacturing to implementation
Abstract : This doctoral thesis is devoted to studying the possibilities of using additive manufacturing (AM) and design based on computed tomography (CT), for the production of patient-specific implants within orthopedic surgery, initially in a broad perspective and, in the second part of the thesis focusing on customized clavicle osteosynthesis plates. The main AM method used in the studies is the Electron Beam Melting (EBM) technology. READ MORE
-
5. Conventional spiral and low-dose computed mandibular tomography for dental implant planning
Abstract : Absorbed doses to radiosensitive organs in the head and neck from pre-implant conventional hypocycloidal, conventional spiral and computed tomography (CT) were measured with thermoluminescent dosimeters in an anthropomorphic phantom head. From conventional tomography organ doses, except to the major salivary glands, were below 0.2 mGy. READ MORE