Search for dissertations about: "Injection moulding"

Showing result 1 - 5 of 39 swedish dissertations containing the words Injection moulding.

  2. 1. Surface Interactions in Powder Injection Moulding

    Author : Elisabeth Johansson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; surfactants; powder injection moulding PIM ; rheology; steel powder; surface interactions; XPS; SIMS; adsorption; surface composition;

    Abstract : Powder Injection Moulding (PIM) is an attractive technique for producing complex components in large quantities my means of powder technology. The process includes mixing powder with a suitable binder, usually a thermoplastic polymer. Because of the large attractive forces between small particles the powder can be agglomerated in the binder. READ MORE

  4. 2. Harmetal powder injection moulding (PIM) : process development

    Author : Johnny Bruhm; KTH; []
    Keywords : ;

    Abstract : .... READ MORE

  5. 3. On Defect Generation and the Appearance of Injection-Moulded Polymers

    Author : Francesco Pisciotti; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; colour; gloss; ageing; rheology; defect; mechanical properties; surface topography; recycling; polypropylene; injection moulding; mass spectroscopy; simulation; polystyrene;

    Abstract : This thesis addresses the generation of some important manufacturing defects associated with intrinsic limitations of the injection moulding process. These include bulk-surface structural discontinuities, particularly air traps and welds, bulk-surface compositional inhomogeneities and gloss and colour variations. READ MORE

  6. 4. Flow-induced Surface Defects and Ageing Behaviour of Injection-moulded Polymers

    Author : Giovanna Iannuzzi; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; PP; surface defects; flow marks tiger stripes ; ageing; Injection moulding; ABS; rheological properties; degradation; surface topography; discolouration;

    Abstract : Injection moulding is one of the most commonly used manufacturing methods for the production of polymer-based components such as car bumpers and other automotive details. The surface appearance of these products is of great importance since it is directly connected to the perceived quality. READ MORE

  7. 5. A Model System for Powder Injection Moulding – Physical Properties and Mould Filling Analysis

    Author : Henrik Persson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; processing conditions; thermal properties; computer simulations; rheology; powder injection moulding; mould filling; jetting;

    Abstract : ABSTRACTPowder injection moulding (PIM) is an important and accepted industrial technique for producing net-shaped components which combines the advantages of injection moulding and powder metallurgy. The properties of the feedstock, a mixture of powder and binder system (often based on a thermoplastic polymer), strongly influence the process. READ MORE