Search for dissertations about: "Jet Momentum"

Showing result 1 - 5 of 43 swedish dissertations containing the words Jet Momentum.

2. 1. Turbulent jets in confined spaces : application in mixing ventilation: experimental and numerical studies

   Author : Taghi Karimipanah; Mats Sandberg; H. A. Awbi; Högskolan i Gävle; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; turbulent; wall jet; impinging jet; free jet; confinement effect; pressure; throw; experimental; numerical; corner; momentum; mixing ventilation;

   Abstract : The basis of mixing ventilation is the airflow supply to the room by means of jets initiatedfrom the ventilation diffusers. To avoid the draught problem, the design of mixing ventilationmakes uses the throw term, which is defined as the distance to the supply air terminal inwhich the jet centreline mean velocity is decreased to a given value. READ MORE

4. 2. Experimental studies in jet flows and zero pressure-gradient turbulent boundary layers

   Author : Ramis Örlü; P. Henrik Alfredsson; Tim B. Nickels; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Axisymmetric jet; swirling jet; coaxial jet; heated jet; zero pressuregradient turbulent boundary layer; wall-bounded turbulent flows; overlap region; passive scalar mixing; hot-wire anemometry; spatial resolution.; Fluid mechanics; Strömningsmekanik;

   Abstract : This thesis deals with the description and development of two classical turbulent shear flows, namely free jet and flat plate turbulent boundary layer flows. In both cases new experimental data has been obtained and in the latter case comparisons are also made with data obtained from data bases, both of experimental and numerical origin. READ MORE

5. 3. High Pressure Jet Assistance in Steel Turning

   Author : Patrik Dahlman; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Jet Assistance; Tool Life; Chip Control; Turning; Ultra High Pressure Cooling; Jet Momentum;

   Abstract : Steel turning is one of the most common industrial processes today. It is a very old process, where a lot of improvements and optimisations have been done throughout history. But, the struggle for further cost reductions pushes the process development into new areas. READ MORE

6. 4. Turbulence Measurements in a Natural Convection Boundary Layer and a Swirling Jet

   Author : Abolfazl Shiri; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirl; constant current bridge; high Rayleigh number; natural convection; Jet; cold-wire thermometry; vertical cylinder; laser Doppler anemometry; turbulent boundary layers;

   Abstract : Two sets of experimental measurement were carried out on an axisymmetric swirling jet flow and a natural convection boundary layer. In the first experiment, the far field of an incompressible swirling jet, discharged into a quiescent ambient has been studied using laser Doppler anemometry. READ MORE

7. 5. Non-Spherical Particle Interaction in Duct and Jet Flow

   Author : Ammar Hazim; Matthias Mandø; Luleå tekniska universitet; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Solid-gas flow; turbulence modulation; duct flow; coaxial jets flow; swirl jet flow; active flow control; synthetics jet; biomass powder; non-spherical particles; PIV measurement; Strömningslära; Fluid Mechanics;

   Abstract : Wood waste is the most popular biomass recourse for many nations. Burned wood can, direct or indirect, release one of the greenhouse gases, carbon dioxide. The process can still be seen as a renewable source of energy since replanting of the trees and crops are consuming nearly the same amount of carbon dioxide through photosynthesis. READ MORE