Search for dissertations about: "Kvantitativ analys"
Showing result 1 - 5 of 44 swedish dissertations containing the words Kvantitativ analys.
-
1. Development of Techniques and Methods for the Quantitative Analysis of Endogenous Substances by Microcolumn Liquid Chromatography Coupled to Mass Spectrometry
Abstract : Liquid chromatography-mass spectrometry (LC-MS) is a powerful technique for the analysis of endogenous compounds. The introduction of electrospray ionization (ESI) as an interface between LC and MS has contributed strongly to a trend towards miniaturization of LC, due to the possibility to perform ESI at low flow rates. READ MORE
-
2. Tools for Control System Design : Stratification of Matrix Pairs and Periodic Riccati Differential Equation Solvers
Abstract : Modern control theory is today an interdisciplinary area of research. Just as much as this can be problematic, it also provides a rich research environment where practice and theory meet. This Thesis is conducted in the borderline between computing science (numerical analysis) and applied control theory. READ MORE
-
3. Enzyme-Based Amperometric Biosensors in Flow-Systems for Biomolecule Detection
Abstract : Amperometric enzyme based biosensors were designed, developed and characterised in flow systems. Solid graphite and carbon paste electrodes were used as support for enzyme immobilisation. Both mediated and direct electron transfers between redox enzymes and electrodes were utilised for biosensor construction, as well as coupled enzyme systems. READ MORE
-
4. Sensitivity and selectivity studies in capillary electrophoresis
Abstract : Capillary electrophoresis is characterised by high separation efficiency, applicability to a wide range of compounds, small sample and solvent consumption and simple instrumentation. To improve sensitivity using on-line absorbance detectors, which are hampered by the short optical path length, sample volumes in the microlitre range were concentrated to nanolitre volumes either off-line or on-line. READ MORE
-
5. On the deformation behavior and cracking of ductile iron; effect of microstructure
Abstract : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. READ MORE