Search for dissertations about: "Laser beam welding"

Showing result 16 - 20 of 35 swedish dissertations containing the words Laser beam welding.

  2. 16. Laser welding of boron steels for light-weight vehicle applications

    Author : Karl Fahlström; Lars-Erik Svensson; Leif Karlsson; Jens Klaestrup Kristensen; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser welding; boron steel; high strength steels; strength reduction; brittle behavior; crack susceptibility; distortions; light-weight; quality; Manufacturing and materials engineering; Produktions- och materialteknik; Production Technology; Produktionsteknik;

    Abstract : Laser beam welding has gained a significant interest during the last two decades. The suitability of the process for high volume production has the possibility to give a strong advantage compared to several other welding methods. However, it is important to have the process in full control since various quality issues may otherwise occur. READ MORE

  4. 17. Laser metal fusion and deposition using wire feedstock : Process modelling and CFD simulation

    Author : Seyyed Mohammad Ali Noori Rahim Abadi; Isabelle Choquet; Fredrik Sikström; Norbert Enzinger; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Directed Energy Deposition with wire; Beam shaping; Absorptivity; Conduction-mode; Free surface deformation; Computational Fluid Dynamics; OpenFOAM.; Riktad energideponering med svetstråd; Stråformning; Absorption; Svetsning; Ytdeformation; Beräkningsströmningsdynamik; OpenFOAM.; Production Technology; Produktionsteknik;

    Abstract : Laser metal fusion is widely used in production technology to manufacture parts, as in welding, cladding, and additive manufacturing. In this study, conduction mode laser metal fusion is applied without and with metal deposition from a wire feedstock. READ MORE

  5. 18. Laser Welding and Additive Manufacturing of Duplex Stainless Steels : Properties and Microstructure Characterization

    Author : Amir Baghdadchi; Leif Karlsson; Vahid Hosseini; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Production Technology; Produktionsteknik;

    Abstract : Duplex stainless steels (DSS), with a ferritic-austenitic microstructure, are used ina wide range of applications thanks to their high corrosion resistance and excellent mechanical properties. However, efficient and successful production and joining of DSS require precise control of processes and an in-depth understanding o frelations between composition, processing thermal cycles, resulting microstructures and properties. READ MORE

  6. 19. Microstructure and mechanical properties of Ti-6Al-4V welds produced with different processes

    Author : Sakari Tolvanen; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fatigue; welding; porosity; microstructure; defects; Ti-6Al-4V;

    Abstract : Titanium alloys are widely used for components in the fan and compressor sections of aeroengines mainly because of their superior strength-to-weight ratio. Large static compressor components can be manufactured by welding together smaller subcomponents, which has potential to provide benefits such as higher buy-to-fly ratio and improved performance of the components. READ MORE

  7. 20. Imaging and analysis methods for automated weld inspection

    Author : Patrik Broberg; Tadeusz Stepinski; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Welding; materials; Manufacturing and materials engineering; Produktions- och materialteknik; Experimental Mechanics;

    Abstract : All welding processes can give rise to defects, which weakens the joint and can eventually lead to the failure of the welded structure. In order to inspect welds for detects, without affecting the usability of the product, non-destructive testing (NDT) is needed. READ MORE