Search for dissertations about: "Load curve"

Showing result 1 - 5 of 65 swedish dissertations containing the words Load curve.

  2. 1. The future load curve of the Swedish building stock – Interactions between the heating load and district heating

    Author : Dmytro Romanchenko; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; thermal energy storage; District heating; demand response; buildings; optimisation; space heating;

    Abstract : In line with global efforts directed against climate change, the building sector is required to undergo significant changes in terms of its energy management. This is the case for both the use of energy (reduced energy consumption) and the supply of energy (heat and electricity), and how these two interact. READ MORE

  4. 2. Experimental Study on Truck Related Power Losses: The Churning Losses in a Transmission Model and Active Flow Control at an A-pillar of Generic Truck Cabin Model

    Author : Erwin Adi Hartono; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hot wire anemometry; Machine learning; Computational Fluid Dynamics; A-Pillar; Transmission; Flow separation; Churning losses; CFD; Gearbox; Torque measurement; Particle Image Velocimetry; Smoothed Particle Hydrodynamics.; Active Flow Control; SPH; Curve fit; Synthetic Jets; Load independent power losses; Aeration; Flow visu- alization;

    Abstract : The fight with global warming constantly forces vehicle manufacturers to innovate, in order to be able to reduce the CO2 emissions of their product. This means that marginal efficiency gains in every component are considered beneficial for total reduction of CO2 emissions. READ MORE

  5. 3. Thermal Cycling, Creep- and Tensile Testing of Cast Exhaust Materials at Elevated Temperatures

    Author : Christian Öberg; Stefan Jonsson; Henrik Östling; KTH; []
    Keywords : creep; constant-load; thermal cycling; tensile test; cast materials; cast iron; exhaust materials.; Teknisk materialvetenskap; Materials Science and Engineering;

    Abstract : An exhaust manifold of a truck engine is subjected to tough conditions. As the truck is started, operated and shut down, it becomes subjected to thermal cycling up to around 800°C. At such high temperatures, corrosion, fatigue and creep are active degradation mechanisms. READ MORE

  6. 4. Surface interactions and adsorbate structures : An atomic force microscopy study

    Author : Goran Bogdanovic; KTH; []
    Keywords : atomic force microscope; AFM; cantilever calibration; colloidal probe; surface force; force curve; friciton; hydrophobic; adhesion; roughness; multilayer; silica; cellulose; cationic polyelectrolyte; MAPTAC;

    Abstract : Atomic force microscopy, AFM, was used for studying somecurrent topics in the field of surface and colloid science. Themain topics addressed in this thesis were: the nature of thelong-range attraction between hydrophobic surfaces; slidingfriction behavior for microscopic contacts; and interfacialstructuring of polyelectrolyte-nanoparticle multilayerfilms. READ MORE

  7. 5. Force measurements using scanning probe microscopy : Applications to advanced powder processing

    Author : Anders Meurk; KTH; []
    Keywords : atomic force microscope; AFM; SPM; van der Waals interaction; DLVO-theory; surface forces; colloidal probe; force curve; friction; adhesion; stick-slip; cantilever; calibration; spring constant; silicon nitride; iron; silica;

    Abstract : The object of this thesis is to apply scanning probemicroscopy (SPM) to the field of advanced powder processing.Measurement of interparticle surface forces at conditionsrelevant to ceramic processing has been performed together withthorough studies of powder friction. READ MORE