Search for dissertations about: "Material losses"
Showing result 21 - 25 of 278 swedish dissertations containing the words Material losses.
-
21. Settling Mechanisms of Valuable Metal Droplets in Iron Silicate Slag
Abstract : A significant source of copper losses from pyrometallurgical copper extraction is attributed to dissolved and entrained copper in discarded slag. Entrained copper can be recovered via pyrometallurgical slag cleaning in a settling furnace where the droplets settle under gravity. READ MORE
-
22. Aluminium alloy development for Additive Manufacturing
Abstract : Powder Bed Fusion (PBF Additive Manufacturing AM have emerged as a promising manufacturing process possessing a powerful combination of characteristics. Most noticeable are the near-net-shape, short lead time and flexibility, both with regard in design freedom and in part-to-part variation. READ MORE
-
23. Blast furnace coke properties and the influence on off-gas dust
Abstract : In blast furnace ironmaking, efforts are made to decrease the coke consumption mainly by increasing the pulverized coal injection rate. This will cause changes in in-furnace reduction conditions, burden distribution and demands on raw material strength, etc. READ MORE
-
24. Cracking during Continuous Casting of Steels : Analysis tools and procedures to identify their causes on microalloyed steel slabs
Abstract : Transverse corner cracks are one of the most common but complex defects formed in microalloyed steels during continuous casting (CC). Such cracks are detrimental because it leads to a loss in productivity with a great impact on environment, energy and economics for several steel making companies all over the world. READ MORE
-
25. Development of coke properties during the descent in the blast furnace
Abstract : The efficiency in use of reducing agents in blast furnace (BF) ironmaking has been significantly improved over the years. At most blast furnaces, auxiliary fuels are injected to replace some of the coke. To further reduce carbon consumption, prevention of losses and modification of raw materials or process conditions are required. READ MORE