Search for dissertations about: "Materialteknik Metallurgi och metalliska material"
Showing result 1 - 5 of 572 swedish dissertations containing the words Materialteknik Metallurgi och metalliska material.
-
1. Coated Ferritic Stainless Steels as Interconnects in Solid Oxide Fuel Cells - Material Development and Electrical Properties
Abstract : Solid oxide fuel cells (SOFCs) are attracting increasing interest as devices with potentialuses in decentralized and clean electricity and heat production. Several challengeswith respect to materials have to be overcome to achieve efficiencies and life-spansthat are sufficient for long-term applications. READ MORE
-
2. Additive-Driven Improvements in Interfacial Properties and Processing of TMP-Polymer Composites
Abstract : Efforts to address environmental concerns have resulted in new regulations designed to plan the reduction of plastic and synthetic polymer usage, necessitating the search for sustainable natural alternatives with comparable cost-effectiveness and mechanical performance. Thermomechanical pulp (TMP) fibres are one of the most affordable natural fibres that have no chemical refining in production, production have a high yield of 90-98% and TMP fibres have been demonstrated to improve the mechanical characteristics (strength, stiffness and toughness) of wood-polymer composites (WPCs) compared to the pure polymer. READ MORE
-
3. Heterogeneous deformation of multi-phase engineering materials - an in-situ neutron diffraction study
Abstract : Gas turbines are complex power generation systems used in aerospace or land-based-power stations. Materials such as Ni-base superalloys are involved in the combustion zone of these machines, which continuously experiences harsh environments with loading at high temperatures. READ MORE
-
4. Towards sustainability in additive manufacturing: material and process aspects
Abstract : The acceptance of additive manufacturing (AM) depends on the quality of final parts and process repeatability. Recently, many studies have been dedicated to the establishment of the relationship between the process behavior and material performance. READ MORE
-
5. Experimental study and simulation of sintering of 316L components produced by binder jetting
Abstract : Binder Jetting (BJT) is a multi-step Additive Manufacturing (AM) technique that is used for producing components with highly complex geometries and competitive final properties with high productivity when compared to other AM technologies. The first step provides the basic part geometric shape (BJT printing), and the next step (debinding and sintering) consolidates the part to reach final geometry and intended basic material properties. READ MORE