Search for dissertations about: "Mekaniska egenskaper"

Showing result 1 - 5 of 137 swedish dissertations containing the words Mekaniska egenskaper.

  1. 1. Strontium Titanate-based Anodes for Solid Oxide Fuel Cells

    University dissertation from Polymer and Materials Chemistry (LTH)

    Author : Peter Blennow Tullmar; [2007]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; Kondenserade materiens egenskaper:elektronstruktur; spectroscopy; relaxation; magnetic resonance; supraconductors; magnetic and optical properties; electrical; Condensed matter:electronic structure; fasjämvikt; egenskaper termiska och mekaniska ; kristallografi; phase equilibria; Kondenserade materiens egenskaper:struktur; Condensed matter:stucture; thermal and mechanical properties; crystallography; infiltration; surfactant; ceria; Gd-doped ceria; redox stability; SOFC; ceramic anode; XRD; XANES; electrochemical impedance spectroscopy; defect chemistry; Nb-doped SrTiO3; electron microscopy; egenskaper elektriska; magnetiska och optiska ; supraledare; magnetisk resonans; spektroskopi; Inorganic chemistry; Oorganisk kemi; Electrochemistry; Elektrokemi; Energy research; Energiforskning; Composite materials; Kompositmaterial; Ceramic materials and powders; Keramiska material och pulver;

    Abstract : The purpose for this work has been to develop new robust fuel electrodes for solid oxide fuel cells (SOFC). The aim was to find suitable ceramic materials or composites with promising properties for the use as SOFC anodes. READ MORE

  2. 2. Optimization of Electron Beam Melting for Production of Small Components in Biocompatible Titanium Grades

    University dissertation from Uppsala : Acta Universitatis Upsaliensis

    Author : Joakim Karlsson; Håkan Prof.; Mikael Bäckström; [2015]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive Manufacturing; 3D-printing; Electron Beam Melting; Titanium alloys; Chemical properties; Mechanical properties; Surface properties; Additiv tillverkning; 3D-skrivare; Electron Beam Melting; Titan; Kemiska egenskaper; Mekaniska egenskaper; Ytegenskaper; Teknisk fysik med inriktning mot materialvetenskap; Engineering Science with specialization in Materials Science;

    Abstract : Additive manufacturing (AM), also called 3D-printing, are technologies where parts are formed from the bottom up by adding material layer-by-layer on top of each other. Electron Beam Melting (EBM) is an AM technique capable of manufacturing fully solid metallic parts, using a high-intensity electron beam to melt powder particles in layers to form finished components. READ MORE

  3. 3. Transmission Electron Microscopy of Semiconductor Nanowires

    University dissertation from Polymer och Materialkemi Kemiska Institutionen

    Author : Magnus Larsson; [2007]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; Nanowires; magnetic resonance; supraconductors; magnetic and optical properties; electrical; Condensed matter:electronic structure; fasjämvikt; kristallografi; egenskaper termiska och mekaniska ; crystallography; phase equilibria; Kondenserade materiens egenskaper:struktur; akustik; Condensed matter:stucture; thermal and mechanical properties; optics; acoustics; Elektromagnetism; optik; Electromagnetism; Scanning Tunneling Microscopy; Nanomaterials; III-V Semiconductors; Transmission Electron Microscopy; Inorganic chemistry; Oorganisk kemi; relaxation; spectroscopy; Kondenserade materiens egenskaper:elektronstruktur; egenskaper elektriska; magnetiska och optiska ; supraledare; magnetisk resonans; spektroskopi; materialteknik; Material technology; Materiallära; Semiconductory physics; Halvledarfysik;

    Abstract : Semiconductor nanowires are studied by using transmission electron microscopy (TEM) based methods in this work. In the first section, the growth mechanism of gallium arsenide nanowires grown by chemical beam epitaxy is investigated. The nanowires are epitaxially grown from a gallium arsenide substrate by using gold seed particles as catalysts. READ MORE

  4. 4. On the influence of Si on anodising and mechanical properties of cast aluminium alloys

    University dissertation from Jönköping : Jönköping University, School of Engineering

    Author : Baiwei Zhu; Caterina Zanella; Salem Seifeddine; Peter Leisner; [2017]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Al-Si based casting alloys; anodising; corrosion protection; mechanical properties; Al-Si-baserade gjutningslegeringar; anodisering; korrosionsskydd; mekaniska egenskaper;

    Abstract : The combination of two cost-effective processes, i.e. casting and anodising, would be an interest for the aluminium component applications. However, there are some obstacles in the application of anodising on cast Al alloys. READ MORE

  5. 5. Characterisation of mechanical and thermal properties of tungsten for high power spallation target applications

    University dissertation from Department of Mechanical Engineering, Lund University

    Author : Jemila Habainy; [2018-10-01]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Utmattning; Termisk diffusivitet; Volfram; Spallation; Strålningseffekter; ESS; Oxidation; Mekaniska egenskaper; Mechanical Properties; Thermal diffusivity; Tungsten; ESS; Spallation target; Irradiation effects; Fatigue; Oxidation;

    Abstract : The European Spallation Source (ESS), which is currently under construction in Lund, will use pure tungsten as the spallation neutron target. The tungsten will be irradiated by a 2 GeV proton beam, pulsed at a repetition rate of 14 Hz. READ MORE