Search for dissertations about: "Metallurgical process engineering"
Showing result 11 - 15 of 143 swedish dissertations containing the words Metallurgical process engineering.
-
11. Structure and mechanical properties of dual phase steels : An experimental and theoretical analysis
Abstract : The key to the understanding of the mechanical behavior of dual phase (DP) steels is to a large extent to be found in the microstructure. The microstructure is in its turn a result of the chemical composition and the process parameters during its production. READ MORE
-
12. Ti3SiC2 synthesis by powder metallurgical methods
Abstract : The MAX phases constitute a group of ternary ceramics which has received intense attention over the last decade due to their unique combination of properties. The Ti3SiC2 is the most well studied MAX phase to date and it has turned out to be a promising candidate for high temperature applications. READ MORE
-
13. On the Study of a Liquid Steel Sampling Process
Abstract : The liquid steel sampling method is one of the commonly used procedures in monitoring the steelmaking process. Besides it can be used for analyzing the dissolved alloys, hydrogen content and oxygen content, it can be also employed to monitor the inclusion characteristics at the steelmakings. READ MORE
-
14. A study of mold flux entrapment and gas entrainment in an ingot casting process
Abstract : The focus of this work is to study the gas entrainment and mold flux entrapments during the ingot filling process based on physical and numerical modelling.The formation of the free surface was investigated in the uphill teeming method, which illustrates a dynamic change at a quasi-steady state. READ MORE
-
15. Towards full Automation of Robotized Laser Metal-wire Deposition
Abstract : Metal wire deposition by means of robotized laser welding offers great saving potentials, i.e. reduced costs and reduced lead times, in many different applications, such as fabrication of complex components, repair or modification of high-value components, rapid prototyping and low volume production, especially if the process can be automated. READ MORE