Advanced search

Showing result 1 - 5 of 31 swedish dissertations matching the above criteria.

  2. 1. A Study on Particle Motion and Deposition Rate : Application in Steel Flows

    Author : Peiyuan Ni; Pär Jönsson; Lage Jonsson; Mikael Ersson; Stein Tore Johansson; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; steel flow; ladle teeming; continuous casting; non-metallic inclusion behavior; particle deposition; nozzle clogging; numerical simulation.;

    Abstract : Non-metallic inclusions in molten steel have received worldwide attention due to their serious influence on both the steel product quality and the steel production process. These inclusions may come from the de-oxidation process, the re-oxidation by air and/or slag due to an entrainment during steel transfer, and so on. READ MORE

  4. 2. Modeling of Gas Flows in Steelmaking Decarburization Processes

    Author : Zhili Jack Song; Pär Jönsson; Seppo Louhenkilpi; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VOD; nozzle; jet; vacuum; BOF; LD; AOD; post combustion; flue; CFD;

    Abstract : The purpose of the current study is to increase the understanding of different steelmaking processes at the decarburization stages by use of mathematical modeling. More specifically, two De-Laval nozzles from a VOD (Vaccum Oxygen Decarburization) process, which is used for producing stainless steels with ultra-low carbon grades, was investigated for different vessel pressures. READ MORE

  5. 3. Numerical and Experimental study of shock boundary layer interaction in unsteady transonic flow

    Author : Olivier Bron; KTH; []
    Keywords : Shock Boundary Layer Interaction; Shock Motion; Unsteady Flows; Nozzle Flows; Potential Interaction; Back Pressure Perturbations;

    Abstract : A prerequisite for aeroelastic stability prediction inturbomachines is the understanding of the fluctuatingaerodynamic forces acting on the blades. Unsteady transonicflows are complex because of mutual interactions betweentravelling pressure waves, outlet disturbances, shock motion,and fluctuating turbulent boundary layers. READ MORE

  6. 4. Investigation of jet pulsation effects on near-nozzle mixing and entrainment

    Author : Alexander Nygård; Laszlo Fuchs; Lisa Prahl Wittberg; Mireia Altimira; Xandra Margot; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Sprays; Nozzle; Mixing; Pulsation; Engineering Mechanics; Teknisk mekanik;

    Abstract : Turbulent jet flows are very common in engineering applications. One example is that of fuel injection in internal combustion engines, which is closely related to the combustion process. Because of the widespread use, the resulting emissions of such engines have a significant impact on human health and the environment. READ MORE

  7. 5. A Study of the Initial Mould Filling during Up-hill Ingot Casting

    Author : Line Hallgren; Pär Jönsson; Anders Tilliander; Seppo Louhenkilpi; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; up-hill teeming; nozzle; casting; fluid flow; modelling; CFD; LDA; swirl; ingot casting; filling; red eye;

    Abstract : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. READ MORE