Search for dissertations about: "Power and thermal"
Showing result 1 - 5 of 689 swedish dissertations containing the words Power and thermal.
-
1. Wind power in thermal power systems
Abstract : AbstractWind power is a key technology in the effort to transform the power system in order to reduce its climate impact. However, the ability of wind power to reduce CO2-emissions depends on the properties of the power system. READ MORE
-
2. Process Control and Simulation of Ferromagnetic Strip in the Power Transformers and Electrical Machines Applications : Electric power systems
Abstract : This thesis investigates optimization of the control of electrical and thermal equipment by using FEM and CFD modeling in combination with dynamic simulation models. The thesis focuses on the production of electrical strips and the control system with the aim of reducing losses and improving magnetic properties. READ MORE
-
3. Possibilities of using thermal mass in buildings to save energy, cut power consumption peaks and increase the thermal comfort
Abstract : The aim of this project was to generate knowledge to enable us to take advantage of heat storage in heavy building structures with regard to as energy savings, better thermal indoor climate, and reduced peak powers. This could include buildings that can function without energy input during cold periods, buildings that give a robust indoor climate without installed cooling, and buildings with good thermal comfort also in case of higher outdoor temperatures resulting from global warming. READ MORE
-
4. Waste-heat Recovery Using Thermoelectricity and Silicon Carbide Power Electronics
Abstract : Energy consumption in the world has increased continuously due to a growing population and increased energy consumption per capita. Moreover, the largest part of consumed energy still comes from fossil sources which in 2016 was more than 130 PWh. READ MORE
-
5. Thermal response test : method development and evaluation
Abstract : Since the first introduction of thermal response tests with mobile measurement devices in Sweden and USA in 1995, the method has developed and spread in North America and Europe. Thermal response tests have so far been used primarily for in situ determination of design data for BHE (borehole heat exchanger) systems, but also for evaluation of grout material, heat exchanger types and groundwater effects. READ MORE